User Manual
Table Of Contents
- Table of contents
- Introduction
- Controls and functions
- Overview of screens
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Other fixed display areas
- MAINTENANCE screen
- Operating Screens
- SCENE screen
- RECORDER screen
- MONITOR screen
- SETUP screen
- LOGIN screen
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Adjusting EQ in manual mode
- Adjusting EQ in 1-knob mode
- Configuring the HPF
- Configuring GATE/DUCKING
- Adjusting the compressor in manual mode
- Adjusting the compressor in 1-knob mode
- Setting effects
- Adjusting the send to MIX/MATRIX BUS level
- Setting the send to FX BUS level
- Adjusting the send to FX/MIX/MATRIX BUS level with faders
- Using GEQ
- Using faders to adjust GEQ
- Configuring mute safe
- Setting the send levels from output channels (MIX, STEREO) to MATRIX
- Recall presets
- Editing presets
- MAINTENANCE screen
- DM3 Editor
- Using the Editor
- Appendix
Dante Auto Setup patches
The following Auto Setup patches are available for Auto Setup compatible devices in a Dante network.
DM3 Dante Port UNIT ID Compatible Model Signal
In 01
Y001
Tio1608-D
Rio1608-D
Rio3224-D
Rio1608-D2
Rio3224-D2
Tx 01
In 02 Tx 02
In 03 Tx 03
In 04 Tx 04
In 05 Tx 05
In 06 Tx 06
In 07 Tx 07
In 08 Tx 08
In 09 Tx 09
In 10 Tx 10
In 11 Tx 11
In 12 Tx 12
In 13 Tx 13
In 14 Tx 14
In 15 Tx 15
In 16 Tx 16
Out 01
Y001
Tio1608-D
Rio1608-D
Rio3224-D
Rio1608-D2
Rio3224-D2
Rx 01
Out 02 Rx 02
Out 03 Rx 03
Out 04 Rx 04
Out 05 Rx 05
Out 06 Rx 06
Out 07 Rx 07
Out 08 Rx 08
Out 09 Y001
DZR10-D
DZR12-D
DZR15-D
DZR315-D
DXS15XLF-D
DXS18XLF-D
Rx 01
Out 10 Y002 Rx 01
Out 11 Y003 Rx 01
Out 12 Y004 Rx 01
Out 13 Y005 Rx 01
Out 14 Y006 Rx 01
Out 15 Y007 Rx 01
Out 16 Y008 Rx 01
NOTE
(
Any 1 unit of Tio/Rio/Rio-D2 can be connected with multiple DZR/DXS.
(
If multiple units of the same model and UNIT ID exist, the patch is applied to the first device detected.
340
Appendix > Parameters