User Manual
Table Of Contents
- Table of contents
- Introduction
- Controls and functions
- Overview of screens
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Other fixed display areas
- MAINTENANCE screen
- Operating Screens
- SCENE screen
- RECORDER screen
- MONITOR screen
- SETUP screen
- LOGIN screen
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Adjusting EQ in manual mode
- Adjusting EQ in 1-knob mode
- Configuring the HPF
- Configuring GATE/DUCKING
- Adjusting the compressor in manual mode
- Adjusting the compressor in 1-knob mode
- Setting effects
- Adjusting the send to MIX/MATRIX BUS level
- Setting the send to FX BUS level
- Adjusting the send to FX/MIX/MATRIX BUS level with faders
- Using GEQ
- Using faders to adjust GEQ
- Configuring mute safe
- Setting the send levels from output channels (MIX, STEREO) to MATRIX
- Recall presets
- Editing presets
- MAINTENANCE screen
- DM3 Editor
- Using the Editor
- Appendix
Parameter Range Description
Type
S-Hall, L-Hall, Random,
Reverse, Plate, Spring
Early reflection sound pattern.
Room Size 0.1 - 20.0 Room size (interval between reflections)
Liveness 0 - 10 Decay of the early reflections (0: dead, 10: Live)
Initial Delay 0.1 ms - 200.0 ms Delay until early reflection is heard.
Diffusion 0 - 10 Width of the reflections in the stereo field.
Density 0 - 3 Density of the reflections.
Feedback Gain -99% - +99% Amount of feedback.
High Ratio 0.1 - 1.0 Amount of high-frequency feedback.
HPF Thru, 21.2 Hz - 8.00 kHz High-pass filter cutoff frequency.
LPF 50.0 Hz - 16.0 kHz, Thru Low-pass filter cutoff frequency.
GATE REVERB
1 IN/2 OUT gate reverb.
Parameter Range Description
Type Type-A, Type-B Early reflection sound pattern.
Room Size 0.1 - 20.0 Room size (interval between reflections)
Liveness 0 - 10 Decay of the early reflections (0: dead, 10: Live)
Initial Delay 0.1 ms - 200.0 ms Delay until early reflection is heard.
Diffusion 0 - 10 Width of the reflections in the stereo field.
Density 0 - 3 Density of the reflections.
Feedback Gain -99% - +99% Amount of feedback.
High Ratio 0.1 - 1.0 Amount of high-frequency feedback.
HPF Thru, 21.2 Hz - 8.00 kHz High-pass filter cutoff frequency.
LPF 50.0 Hz - 16.0 kHz, Thru Low-pass filter cutoff frequency.
MONO DELAY
1 IN/2 OUT basic repeating-type delay.
Parameter Range Description
Delay 1.0 - 2700.0 ms Delay time.
Feedback Gain -99 - +99 Amount of feedback.
High Ratio 0.1 - 1.0 Amount of high-frequency feedback.
HPF Thru, 21.2 Hz - 8.00 kHz High-pass filter cutoff frequency.
LPF 50.0 Hz - 16.0 kHz, Thru Low-pass filter cutoff frequency.
Sync OFF, ON Tempo parameter sync ON/OFF.
Note ----, *1 - *14 Value used to calculate DELAY based on the tempo.
STEREO DELAY
2 IN/2 OUT basic stereo delay.
333
Appendix > Parameters