User Manual
Table Of Contents
- Table of contents
- Introduction
- Controls and functions
- Overview of screens
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Other fixed display areas
- MAINTENANCE screen
- Operating Screens
- SCENE screen
- RECORDER screen
- MONITOR screen
- SETUP screen
- LOGIN screen
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Adjusting EQ in manual mode
- Adjusting EQ in 1-knob mode
- Configuring the HPF
- Configuring GATE/DUCKING
- Adjusting the compressor in manual mode
- Adjusting the compressor in 1-knob mode
- Setting effects
- Adjusting the send to MIX/MATRIX BUS level
- Setting the send to FX BUS level
- Adjusting the send to FX/MIX/MATRIX BUS level with faders
- Using GEQ
- Using faders to adjust GEQ
- Configuring mute safe
- Setting the send levels from output channels (MIX, STEREO) to MATRIX
- Recall presets
- Editing presets
- MAINTENANCE screen
- DM3 Editor
- Using the Editor
- Appendix
Recording
Record the 2MIX source to the USB storage device plugged into the USB connector.
1 Plug a USB storage device into the USB connector.
2 Touch the record button.
The record button begins flashing to indicate that the console is in record-ready mode.
3 When you're ready to start recording, touch the play/pause button.
The record button stays lit during recording.
You can touch the play/pause button to pause and resume recording.
4 When you are ready to stop recording, touch the stop button.
The recorded file is named automatically based on the console's date and time setting.
5 If necessary, touch the file name edit button and change the file name.
Related links
(
“RECORDER (TITLE LIST) screen”(p.63)
(
“RECORDER (INPUT/OUTPUT) screen”(p.67)
(
“PLAYBACK PATCH screen”(p.70)
246
Operating Screens > RECORDER screen