User Manual
Table Of Contents
- Table of contents
- Introduction
- Controls and functions
- Overview of screens
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Other fixed display areas
- MAINTENANCE screen
- Operating Screens
- SCENE screen
- RECORDER screen
- MONITOR screen
- SETUP screen
- LOGIN screen
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Adjusting EQ in manual mode
- Adjusting EQ in 1-knob mode
- Configuring the HPF
- Configuring GATE/DUCKING
- Adjusting the compressor in manual mode
- Adjusting the compressor in 1-knob mode
- Setting effects
- Adjusting the send to MIX/MATRIX BUS level
- Setting the send to FX BUS level
- Adjusting the send to FX/MIX/MATRIX BUS level with faders
- Using GEQ
- Using faders to adjust GEQ
- Configuring mute safe
- Setting the send levels from output channels (MIX, STEREO) to MATRIX
- Recall presets
- Editing presets
- MAINTENANCE screen
- DM3 Editor
- Using the Editor
- Appendix
n
SEND FROM screen menu
Swipe left on the menu swipe indicator on the right of the SEND FROM screen to open the following menu.
e
a
f
b
c
d
a
Copy
Copies the send levels to the select MIX/MATRIX/FX BUS.
b
All Pre
Turns ON all Pre buttons.
c
All Post
Turns OFF all Pre buttons.
d
Paste
Pastes the send levels you copied to the selected MIX/MATRIX channels.
e
All Nominal
Sets all send levels to nominal (0.00 dB).
f
Dup.STEREO
Copies each channel's fader level and applies it to the send level.
220
Channel-specific screens > SEND FROM screen