User Manual
Table Of Contents
- Table of contents
- Introduction
- Controls and functions
- Overview of screens
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Other fixed display areas
- MAINTENANCE screen
- Operating Screens
- SCENE screen
- RECORDER screen
- MONITOR screen
- SETUP screen
- LOGIN screen
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Adjusting EQ in manual mode
- Adjusting EQ in 1-knob mode
- Configuring the HPF
- Configuring GATE/DUCKING
- Adjusting the compressor in manual mode
- Adjusting the compressor in 1-knob mode
- Setting effects
- Adjusting the send to MIX/MATRIX BUS level
- Setting the send to FX BUS level
- Adjusting the send to FX/MIX/MATRIX BUS level with faders
- Using GEQ
- Using faders to adjust GEQ
- Configuring mute safe
- Setting the send levels from output channels (MIX, STEREO) to MATRIX
- Recall presets
- Editing presets
- MAINTENANCE screen
- DM3 Editor
- Using the Editor
- Appendix
OUTPUT CH PATCH screen
The OUTPUT CH PATCH screen is for configuring patch ports to output channels.
c
a
b
a
Channel name
Shows the selected channel name. The selected channel can be moved up/down with the left/right buttons.
b
Patch port name
Shows the name of the port patched from the channel.
c
Port selection buttons
For selecting the patch port from a channel.
n
OUTPUT CH PATCH screen menu
Swipe left on the menu swipe indicator on the right of the OUTPUT CH PATCH screen to open the following
menu.
217
Channel-specific screens > OUTPUT CH PATCH screen