User Manual
Table Of Contents
- Table of contents
- Introduction
- Controls and functions
- Overview of screens
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Other fixed display areas
- MAINTENANCE screen
- Operating Screens
- SCENE screen
- RECORDER screen
- MONITOR screen
- SETUP screen
- LOGIN screen
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Adjusting EQ in manual mode
- Adjusting EQ in 1-knob mode
- Configuring the HPF
- Configuring GATE/DUCKING
- Adjusting the compressor in manual mode
- Adjusting the compressor in 1-knob mode
- Setting effects
- Adjusting the send to MIX/MATRIX BUS level
- Setting the send to FX BUS level
- Adjusting the send to FX/MIX/MATRIX BUS level with faders
- Using GEQ
- Using faders to adjust GEQ
- Configuring mute safe
- Setting the send levels from output channels (MIX, STEREO) to MATRIX
- Recall presets
- Editing presets
- MAINTENANCE screen
- DM3 Editor
- Using the Editor
- Appendix
a
Recall Safe button
Touch to turn recall safe ON/OFF for that channel.
Touch the jump button on the right of the Recall Safe button to open the RECALL SAFE screen.
b
OUTPUT CH PATCH button
Displays the patch destination port.
From the 2nd port on, they are indicated by “+”.
Touch to display the OUTPUT CH PATCH screen.
c
STEREO ON button
Toggles the send to STEREO channel ON/OFF.
d
PAN/BAL slider
Adjusts the left/right volume balance of the send destination STEREO channel.
Related links
(
“RECALL SAFE screen”(p.102)
(
“OUTPUT CH PATCH screen”(p.217)
216
Channel-specific screens > OUTPUT screen