User Manual
Table Of Contents
- Table of contents
- Introduction
- Controls and functions
- Overview of screens
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Other fixed display areas
- MAINTENANCE screen
- Operating Screens
- SCENE screen
- RECORDER screen
- MONITOR screen
- SETUP screen
- LOGIN screen
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Adjusting EQ in manual mode
- Adjusting EQ in 1-knob mode
- Configuring the HPF
- Configuring GATE/DUCKING
- Adjusting the compressor in manual mode
- Adjusting the compressor in 1-knob mode
- Setting effects
- Adjusting the send to MIX/MATRIX BUS level
- Setting the send to FX BUS level
- Adjusting the send to FX/MIX/MATRIX BUS level with faders
- Using GEQ
- Using faders to adjust GEQ
- Configuring mute safe
- Setting the send levels from output channels (MIX, STEREO) to MATRIX
- Recall presets
- Editing presets
- MAINTENANCE screen
- DM3 Editor
- Using the Editor
- Appendix
d
Recall Safe button
Touch to display the RECALL SAFE screen.
e
Fader Assign button
When ON, you can use the faders to adjust each band of the GEQ.
f
Output level meter
Displays the GEQ's output level.
g
Gain sliders
Adjusts the gain by dragging sliders up/down.
Swipe left or right to display the gain sliders for other bands.
Double-touch a slider to return the gain setting to the middle (0.0 dB).
When Fader Assign is turned ON, you can change which bands can be adjusted by the faders.
NOTE
When a slider is highlighted, if you press the [TOUCH AND TURN] knob, the parameters that can be adjusted with it toggle
between slider selection and gain setting.
h
RTA Offset
Adjusts the RTA sensitivity. Touch to highlight and then adjust with the [TOUCH AND TURN] knob.
i
Available bands display
Displays the number of unused bands whose gain can be adjusted.
n
GEQ screen menu
Swipe left on the menu swipe indicator on the right of the GEQ screen to open the following menu.
a
b
c
d
212
Channel-specific screens > GEQ screen