User Manual
Table Of Contents
- Table of contents
- Introduction
- Controls and functions
- Overview of screens
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Other fixed display areas
- MAINTENANCE screen
- Operating Screens
- SCENE screen
- RECORDER screen
- MONITOR screen
- SETUP screen
- LOGIN screen
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Adjusting EQ in manual mode
- Adjusting EQ in 1-knob mode
- Configuring the HPF
- Configuring GATE/DUCKING
- Adjusting the compressor in manual mode
- Adjusting the compressor in 1-knob mode
- Setting effects
- Adjusting the send to MIX/MATRIX BUS level
- Setting the send to FX BUS level
- Adjusting the send to FX/MIX/MATRIX BUS level with faders
- Using GEQ
- Using faders to adjust GEQ
- Configuring mute safe
- Setting the send levels from output channels (MIX, STEREO) to MATRIX
- Recall presets
- Editing presets
- MAINTENANCE screen
- DM3 Editor
- Using the Editor
- Appendix
ASSIGN screen
The ASSIGN screen is for settings like recall safe or mute safe ON/OFF and assigning STEREO channels and
mute groups.
a b c
d
e
a
Recall Safe button
Turns the channel Recall Safe ON/OFF.
Touch the jump button on the right of the Recall Safe button to open the RECALL SAFE screen.
b
Mute Safe button
You can temporarily exclude certain channels from a mute group.
If you mute a mute group, any channels in that group that have mute safe enabled will not be muted.
c
ST button
Turns the assignment to the STEREO channel ON/OFF.
d
PAN slider
Adjusts the channel PAN.
e
Mute buttons
Turns the channel's assignment to MUTE groups 1–6 ON/OFF.
You can assign a channel to multiple MUTE groups.
195
Channel-specific screens > ASSIGN screen