User Manual
Table Of Contents
- Table of contents
- Introduction
- Controls and functions
- Overview of screens
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Other fixed display areas
- MAINTENANCE screen
- Operating Screens
- SCENE screen
- RECORDER screen
- MONITOR screen
- SETUP screen
- LOGIN screen
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Adjusting EQ in manual mode
- Adjusting EQ in 1-knob mode
- Configuring the HPF
- Configuring GATE/DUCKING
- Adjusting the compressor in manual mode
- Adjusting the compressor in 1-knob mode
- Setting effects
- Adjusting the send to MIX/MATRIX BUS level
- Setting the send to FX BUS level
- Adjusting the send to FX/MIX/MATRIX BUS level with faders
- Using GEQ
- Using faders to adjust GEQ
- Configuring mute safe
- Setting the send levels from output channels (MIX, STEREO) to MATRIX
- Recall presets
- Editing presets
- MAINTENANCE screen
- DM3 Editor
- Using the Editor
- Appendix
d
1-knob level slider
Adjusts the amount of 1-knob EQ applied.
When using manual mode, information about the selected band's Q, F, and G is displayed here.
e
EQ mode type selection button
In manual mode, this button selects the filter type. You can switch the filter type between LOW band and HIGH band.
For CH 1-16, the available LOW band filters are low-shelving type and bell type.
For other channel EQs, (i.e., for channel EQs that do not have an HPF), you can choose from HPF, low-shelving, and
bell types.
The available HIGH band filters are LPF, high-shelving, and bell types.
In 1-knob EQ mode, you can select the 1-knob EQ type. Select “Vocal” for vocal channels, and “Intensity” for anything
else.
When set to “Intensity”, you can adjust the EQ to a setting between flat and a more intense value of EQ settings made
using manual mode.
“Loudness” is available for the EQ of output channels. This setting allows you to boost low and high tones.
The available types depend on the channel whose settings you are editing.
CH 1-16
HPF+4Band
ST IN
4Band
FX RTN
4Band
MIX
4Band
STEREO
4Band
MATRIX
4Band
Intensity , , , , , ,
Vocal , ― ― ― ― ―
Loudness ― ― ― , , ,
f
EQ output level meter
Displays the EQ's output level.
177
Channel-specific screens > EQ screen