User Manual
Table Of Contents
- Table of contents
- Introduction
- Controls and functions
- Overview of screens
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Other fixed display areas
- MAINTENANCE screen
- Operating Screens
- SCENE screen
- RECORDER screen
- MONITOR screen
- SETUP screen
- LOGIN screen
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Adjusting EQ in manual mode
- Adjusting EQ in 1-knob mode
- Configuring the HPF
- Configuring GATE/DUCKING
- Adjusting the compressor in manual mode
- Adjusting the compressor in 1-knob mode
- Setting effects
- Adjusting the send to MIX/MATRIX BUS level
- Setting the send to FX BUS level
- Adjusting the send to FX/MIX/MATRIX BUS level with faders
- Using GEQ
- Using faders to adjust GEQ
- Configuring mute safe
- Setting the send levels from output channels (MIX, STEREO) to MATRIX
- Recall presets
- Editing presets
- MAINTENANCE screen
- DM3 Editor
- Using the Editor
- Appendix
If the input source is set to DANTE, ERROR is displayed if an error occurs.
b
GainFinder
Displays the input gain level. When adjusting the input gain, adjust it so it is in the center of the level display. When
the input source is set to USB, it displays a digital input gain level.
c
Level meter
Displays the gain adjusted level.
d
Digital gain text box
Allows you to adjust digital gain. The default setting is 0 dB. You can touch the text box to highlight it, then use the
[TOUCH AND TURN] knob to adjust the setting. You can also touch the text box again to adjust the setting with the
keyboard screen.
172
Channel-specific screens > INPUT screen