User Manual
Table Of Contents
- Table of contents
- Introduction
- Controls and functions
- Overview of screens
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Other fixed display areas
- MAINTENANCE screen
- Operating Screens
- SCENE screen
- RECORDER screen
- MONITOR screen
- SETUP screen
- LOGIN screen
- HOME screen
- DAW REMOTE screen
- Channel-specific screens
- Adjusting EQ in manual mode
- Adjusting EQ in 1-knob mode
- Configuring the HPF
- Configuring GATE/DUCKING
- Adjusting the compressor in manual mode
- Adjusting the compressor in 1-knob mode
- Setting effects
- Adjusting the send to MIX/MATRIX BUS level
- Setting the send to FX BUS level
- Adjusting the send to FX/MIX/MATRIX BUS level with faders
- Using GEQ
- Using faders to adjust GEQ
- Configuring mute safe
- Setting the send levels from output channels (MIX, STEREO) to MATRIX
- Recall presets
- Editing presets
- MAINTENANCE screen
- DM3 Editor
- Using the Editor
- Appendix
MUTE GROUP ASSIGN screen
The MUTE GROUP ASSIGN screen allows you to configure a mute group for each input channel.
Six mute groups can be used with the DM3 series. A mute group is a function that switches mute ON/OFF for
multiples channels as a group.
Such groups can be used when you wish to cut out more than 1 channel at the same time. You can also mix
the same channel in different groups.
a
c
b
a
Mute group name
Displays the configured mute group name.
Touching the jump button at top-right allows the name of the mute group to be edited.
Touch ◀ ▶ buttons to switch the mute group.
b
Mute Group Control button
Switches the displayed mute group ON/OFF. When this button is OFF, the corresponding mute group is disabled.
c
Channel selection buttons
Select the input channels that will be assigned to the mute group.
n
MUTE GROUP ASSIGN screen menu
Swipe left on the menu swipe indicator on the right of the MUTE GROUP ASSIGN screen to open the following
menu.
105
Screen functions and names > SETUP screen