User Manual

a
b
c
f
e
d
a
SEND PAN slider
Displayed when the selected sending destination is stereo. It is used to adjust the SEND PAN setting. When the
sending destination is selected a FX bus, this is not displayed.
b
SEND ON button
Switches the SEND for the selected destination channel ON or OFF. It lights when turned ON.
c
PRE button
Selects whether the signal sent to the selected channel is sent before or after the fader. It lights when turned ON.
(
ON:
Before the fader
(
OFF:
After the fader
d
Fader
Adjust the SEND level for the selected destination channel.
e
SEND level
Displays the current SEND level. You can tap the value and then adjust it by tapping the up and down arrows.
f
CH NAME Display
Displays the channel's number, name, icon, and color.
NOTE
If the SEND destination Bus Type is FIXED, the SEND PAN, PRE and fader are not displayed.
83
Controls and functions > SENDS ON FADER screen