User Manual

e
EQ mode type selection button
In manual mode, this button selects the filter type. You can switch the filter type between LOW band and HIGH band.
For CH 1-16, the available LOW band filters are low-shelving type and bell type.
For other channel EQs, (i.e., for channel EQs that do not have an HPF), you can choose from HPF, low-shelving, and
bell types.
The available HIGH band filters are LPF, high-shelving, and bell types.
In 1-knob EQ mode, you can select the 1-knob EQ type. Select Vocal for vocal channels, and Intensity for anything
else.
When set to Intensity, you can adjust the EQ to a setting between flat and a more intense value of the EQ settings you
made using manual mode.
Loudness is available for the EQ of output channels. This setting allows you to boost low and high tones.
The available types depend on the channel whose settings you are editing.
CH1-16
HPF+4Band
STIN
4Band
FX RTN
4Band
MIX
4Band
STEREO
4Band
MATRIX
4Band
Intensity 〇 〇 〇 〇 〇 〇
Vocal 〇 × × × × ×
Loudness × × × 〇 〇 〇
f
EQ output level meter
Displays the EQ's output level.
62
Controls and functions > Channel-specific screens