User Manual

NOTE
(
DM3 STANDARD cannot be used with Dante.
(
When USB is selected, the gain slider becomes digital gain and the +48V button is hidden.
(
When DANTE is selected and input is from a device that cannot operate the head amp, the gain slider becomes digital gain and the
+48V button is hidden.
(
Even if the input source is set to DANTE, OFFLINE is displayed if the DANTE device is on an offline channel, or if DANTE is working on
a secondary port.
(
If the input source is set to DANTE, ERROR is displayed if an error occurs.
b
GainFinder
Displays the input gain level. When adjusting the input gain, adjust it so it is in the center of the level display. When
the input source is set to USB, it displays a digital input gain level.
c
Level meter
Displays the gain adjusted level.
56
Controls and functions > Channel-specific screens