User Manual

Overview strip area
The STEREO channel strip is normally displayed in the overview strip area. When in the SENDS ON FADER
mode, the strips of the FX, MIX and MATRIX channels are displayed here.
You can switch to the SENDS ON FADER mode by tapping the channel number on the left side of a strip. The
selected channel is then highlighted in the channel's color. Tapping EXIT at the very bottom, or the selected
channel number, restores the regular mode.
In the SENDS ON FADER mode, long-holding the selected channel opens a pop-up menu for copying or
pasting the send level for that channel.
47
Controls and functions > Overview strip area