User`s guide

CHAPTER 6: Other Settings
81
You can assign the ONE TOUCH button on the cradle a
series of procedures for an often used function. The
followings are the available functions.
[Record]: Sets the Disklavier in recording mode. (→
pg. 46)
[Performance]:
Turns on the Performance function. (→
pg. 42)
[Standby]: Turns off the Disklavier. (→ pg. 6 in
“Quick Guide”)
[DisklavierRadio]:
Turns on the DisklavierRadio. (→ pg. 100)
[Metronome]:
Turns on or off the internal metronome.
[Shortcut]: Recalls the function assigned to Shortcut
#1 thru #9 and #0. (→ pg. 79 “Assigning
Frequently-used Functions to the Numeric
Keys of the Pocket Controller (Shortcut)”)
The piano diagnostics may be required as the occasion
demands. In such a case, follow the instructions of your
Yamaha dealer and perform the following procedure.
Assigning a Specific Function
to the ONE TOUCH Button
1
Tap on in the [Main] screen,
and then on .
2
Tap on [Function], press to select
the desired option, and then on
.
Tip: If you cannot find a desired option, tap on
or to switch the screen.
3
Tap on to complete the
operation.
To inactivate the ONE TOUCH button, select
[No Function] in step 2.
Diagnosing the Disklavier
1
Tap on [Service Center] in the
[PRC-100 Menu] screen.
2
Tap on the desired option, and then
follow the instructions that appears
on the screen.
3
Tap on to return to the [PRC-100
Menu] screen.
AdvancedManual.book Page 81 Monday, February 1, 2010 4:48 PM