User`s guide

CHAPTER 6: Other Settings
79
You can assign the numeric keys of the Pocket Controller
keyboard ([1] thru [9] and [0]) a series of procedures for
often used functions. The following functions are
available:
[Power]: Turns on and off the Disklavier.
[Play]: Starts playback of a song or songs in a
selected album/song.
[Repeat]: Starts repeat playback of a song or songs in
the selected album/song.
[Random]: Starts playback of songs in the selected
album at random.
[Radio]: Starts playback of the selected
DisklavierRadio channel. (→ pg. 99
“Accessing the Internet”)
[Balance]: Adjust the volume balance among the
different sound sources (Voice, TG,
Audio, and MIC). (→ pg. 27 “Adjusting
the Volume Balance among the Keyboard
Playing, Ensemble Sound, Software
Playback, and Microphone’s Input”)
[Quiet]: Activates and inactivates the Quiet Mode.
(→ pg.16 “Basic Piano Playing” in “Quick
Guide”)
Assigning Functions
Assigning Frequently-used
Functions to the Numeric
Keys of the Pocket Controller
(Shortcut)
1
Tap on in the [Main] screen,
and then on .
2
Tap on .
Shortcut list
3
Tap on the desired row in the shortcut
list.
4
Tap on [Command], and then press
to select the desired command.
5
Select the detailed setting.
When [Power] or [Quiet] is selected:
Detailed settings are not required. Go to step 6.
When [Play] or [Repeat] is selected:
1 Tap on [Medium], and then press
to select the desired library.
2 Tap on [Album], and then on the
desired album in the list.
3 Tap on [Song], and then on the
desired song in the list.
4 Go to step 6.
Note: You can skip the song selection process in
step 3. In such a case, playback starts from the first
song in the selected album.
When [Random] is selected:
1 Tap on [Medium], and then press
to select the desired library.
2 Tap on [Album], and then on the
desired album in the list.
3 Go to step 6.
Tap to delete the
current shortcut setting.
Tap to cancel the
setting.
AdvancedManual.book Page 79 Monday, February 1, 2010 4:48 PM