User`s guide

ManualsBrandsYamaha ManualsComputer equipmentdisklavier tv

CHAPTER 6: Other Settings

[OMNI OUT Vol]

Adjusts the volume of the outgoing audio signals from

the [OMNI OUT] jacks. The volume can be set in a range

of 0 to 127 or to [Master volume]. When you set to

[Master volume], the OMNI OUT volume works with the

main volume.

[Digital Out]

Selects the desired data to be output from the [DIGITAL

OUT] jack.

[Output]: Select this when you output the same audio

signals as the ones for the Monitor

speakers*.

[OMNI OUT]:

Select this when you output the same audio

signals as the ones to be output from the

[OMNI OUT] jacks.

[SYNC OUT]:

Select this when you output the same audio

signals as the ones to be output from the

[SYNC OUT] jacks.

[OFF]: Select this when you cancel the data

transmission from the [DIGITAL OUT]

jack.

* Only for models supplied with the Monitor speakers.

[A-MIDI Offset]

For some display devices, the video images may be

displayed a little bit later than the piano playing when

playing back the DVD software that contains the analog

MIDI signal. To eliminate this delay, you can adjust the

offset time that leads the actual playback of the piano.

A delay is applied to the incoming analog MIDI signal.

The offset time can be set in a range of –500 ms to 0 ms.

Decrease this value to delay the piano.

[OUTPUT Offset]

For some speakers or digital amplifiers, the audio from

the Disklavier may be output a little bit later than the

acoustic piano playing. To eliminate this delay, you can

adjust the offset time for the sound output. This setting is

applied to the outgoing audio signal from the OUTPUT

jacks, OMNI OUT jacks, and DIGITAL OUT jack.

Decrease this value to advance the sound output. The

offset time can be set in a range of –100 ms to 0 ms.

Decrease this value to delay the piano.

Tap on in the [Main] screen,

and then on .

Tap on [OMNI IN]/[OMNI IN Vol]/

[OMNI OUT]/[OMNI OUT Vol]/

[Digital Out]/[A-MIDI Offset]/

[OUTPUT Offset], and then press

to select the desired option.

Tap on to complete the

operation.

AdvancedManual.book Page 73 Monday, February 1, 2010 4:48 PM