Service manual
Table Of Contents
- CONTENTS
- TO SERVICE PERSONNEL
- FRONT PANELS
- REAR PANELS
- REMOTE CONTROL PANELS
- SPECIFICATIONS
- INTERNAL VIEW
- SET MENU TABLE
- SERVICE PRECAUTIONS
- DISASSEMBLY PROCEDURES
- UPDATING FIRMWARE
- SELF-DIAGNOSTIC FUNCTION
- Starting Self-Diagnostic Function
- Starting Self-Diagnostic Function in the protection cancel mode
- Canceling Self-Diagnostic Function
- Display provided when Self-Diagnostic Function started
- Display during Self-Diagnostic Function operation
- Operation procedure of Main menu and Sub-menu
- Functions in Self-Diagnostic Function mode
- Initial settings used to start Self-Diagnostic Function
- Details of Self-Diagnostic Function menu
- 1. DSP THROUGH
- 2. RAM THROUGH
- 3. PRO LOGIC / Neo:6
- 4. MIC CHECK
- 5. VFD CHECK
- 6. MANUAL TEST
- 7. RS-232C
- 8. FACTORY PRESET
- 9. AD DATA CHECK
- 10.IF STATUS (Input function status)
- 11.DOCK CHECK
- 12.XM CHECK
- 13.DAB CHECK
- 14.HDMI AUDIO
- 15.HDMI INFORMATION
- 16.HDMI SELECT
- 17.VIDEO CONVERSION
- 18.MODEL
- 19.VERSION/CHECK SUM
- 20.DATE
- 21. DSP CHECK
- DISPLAY DATA
- IC DATA
- BLOCK DIAGRAM
- PRINTED CIRCUIT BOARDS
- PIN CONNECTION DIAGRAMS
- SCHEMATIC DIAGRAMS
- REPLACEMENT PARTS LIST
- REMOTE CONTROL
- Adjusting the system parameters
YSP-500/HTY-750
8
-12.0 to +12.0 dB, [0 dB], step 0.5 dB
SWFR, [FRONT]
100, [120], 150 Hz
-20 to 0 dB, [0 dB], step 1.0 dB
0.3 to 15.0 m, [3.0 m], step 0.1 m
1.0 to 50.0 ft, [10.0 ft], step 0.5 ft
[MUTE], -20 dB
0 to 160 ms, [0 ms], step 1 ms
Maximum changes with the modes. / 最大値はモードにより変化
MIN, STD, [MAX]
OFF, [ON]
[FLAT TO WALL], ANGLE TO WALL OR CORNER
2.0 to 12.0 m, step 0.1 m
6.5 to 40.0 ft, step 0.5 ft
2.0 to 12.0 m, step 0.1 m
6.5 to 40.0 ft, step 0.5 ft
1.8 to 9.0 m, step 0.1 m
6.0 to 30.0 ft, step 0.5 ft
0.6 to 11.4 m, step 0.1 m
2.0 ft to 38.0 ft, step 0.5 ft
-90 to +90 deg, step 1 deg
0.3 to 24.0 m, step 0.1 m
1.0 to 80.0 ft, step 0.5 ft
-1.0 to 13.0 m, step 0.1 m
-3.5 to 43.5 ft, step 0.5 ft
-1.0 to 13.0 m, [-0.3 m], step 0.1 m
-3.5 to 43.5 ft, [-1.0 ft], step 0.5 ft
-1.0 to 13.0 m, step 0.1 m
-3.5 to 43.5 ft, step 0.5 ft
-12.0 to +12.0 dB, [0 dB], step 0.5 dB
[OFF], ON
0 to 95%, [0%], step 5%
-6.0 to 0.0 dB, [-3.0 dB], step 0.5 dB
Max: 8 character
space, A to Z, 0 to 9, a to z, #, *, +, ,, -, ., /, :, <, >, ?
-2, -1, [OFF]
[OFF], -1 to -3, DISPLAY OFF
-5 to +5, [0], step 1
1) LOAD
2) SAVE
1)
BEAM + SOUND OPTIMZ
2)
BEAM OPTIMZ only
3)
SOUND OPTIMZ only
1) SOUND MENU
2) BEAM MENU
3) INPUT MENU
4) DISPLAY MENU
A) TONE CONTROL
B) SUBWOOFER SET
C) MUTE LEVEL
D) AUDIO DELAY
E) DD/DTS Dynamic Range
F) TruBass
A) SETTING PARAMETERS
B) BEAM ADJUSTMENT
C) IMAGE LOCATION
A) INPUT MODE
B) INPUT TRIM
C) INPUT RENAME
A) F. DISPLAY SET
B) OSD SET
C) UNIT SET
(T, K, A, B, G, E, L, V models)
TREBLE
BASS
BASS OUT
CROSS OVER
LFE LEVEL
DISTANCE
MUTE
AUDIO DELAY
DD/DTS Dynamic Range
TruBass
INSTALLED POSITION
ROOM WIDTH
ROOM LENGTH
USER POSITION
TO L WALL
a) HORIZONTL ANGLE Front L
Front R
Center
Surround L
Surround R
b) BEAM TRAVEL LENGTH Front L
Front R
Center
Surround L
Surround R
c) FOCAL LENGTH Front L
Front R
Center
Surround L
Surround R
d) TREBLE GAIN Front L
Front R
Center
Surround L
Surround R
IMAGE LOCATION
LEFT L |---- C
RIGHT C ----| R
> AUTO, LAST
TV/STB ANALOG
DIGITAL
VCR ANALOG
AUX DIGITAL
DVD DIGITAL
STANDARD DIMMER
AUTO DIMMER
OSD SHIFT
> METERS, FEET
ENGLISH (English)
DEUTSCH (German)
Français (French)
ESPAÑOL (Spanish)
ITALIANO (Italian)
NEDERLANDS (Dutch)
(Russian)
1
2
3
4
MEMORY
AUTO
SETUP
MANUAL
SETUP
LANGUAGE
SETUP
CATEGORY 1 MAIN MENU 2 SUB MENU 3
SELECT MENU 4
VALUE [INITIAL]
LOAD SEL : MEMORY1, MEMORY2, MEMORY3
SAVE SEL : MEMORY1, MEMORY2, MEMORY3
START SETUP ?
START SETUP ?
START SETUP ?
■ SET MENU TABLE / セットメニュー