Service manual
Table Of Contents
- CONTENTS
- TO SERVICE PERSONNEL
- FRONT PANELS
- REAR PANELS
- REMOTE CONTROL PANELS
- SPECIFICATIONS
- INTERNAL VIEW
- SET MENU TABLE
- SERVICE PRECAUTIONS
- DISASSEMBLY PROCEDURES
- UPDATING FIRMWARE
- SELF-DIAGNOSTIC FUNCTION
- Starting Self-Diagnostic Function
- Starting Self-Diagnostic Function in the protection cancel mode
- Canceling Self-Diagnostic Function
- Display provided when Self-Diagnostic Function started
- Display during Self-Diagnostic Function operation
- Operation procedure of Main menu and Sub-menu
- Functions in Self-Diagnostic Function mode
- Initial settings used to start Self-Diagnostic Function
- Details of Self-Diagnostic Function menu
- 1. DSP THROUGH
- 2. RAM THROUGH
- 3. PRO LOGIC / Neo:6
- 4. MIC CHECK
- 5. VFD CHECK
- 6. MANUAL TEST
- 7. RS-232C
- 8. FACTORY PRESET
- 9. AD DATA CHECK
- 10.IF STATUS (Input function status)
- 11.DOCK CHECK
- 12.XM CHECK
- 13.DAB CHECK
- 14.HDMI AUDIO
- 15.HDMI INFORMATION
- 16.HDMI SELECT
- 17.VIDEO CONVERSION
- 18.MODEL
- 19.VERSION/CHECK SUM
- 20.DATE
- 21. DSP CHECK
- DISPLAY DATA
- IC DATA
- BLOCK DIAGRAM
- PRINTED CIRCUIT BOARDS
- PIN CONNECTION DIAGRAMS
- SCHEMATIC DIAGRAMS
- REPLACEMENT PARTS LIST
- REMOTE CONTROL
- Adjusting the system parameters
YSP-500/HTY-750
44
YSP-500/HTY-750
20.DATE
The updated date of the program, clearance of the pro-
tection history and the remote control reception code
are displayed.
When Remo Code menu is selected, keys become non-
operable due to detection of the values of all keys.
However, it is possible to advance to the next sub-
menu by pushing the “INPUT” key of the main unit.
* Numeric values in the figure example are for refer-
ence.
20.DATE
PROTECT HISTORY DELETE
Reserve/Cancel can be selected by using the “ENTER”
and “RETURN” keys of the remote control.
プロテクション履歴削除の予約/解除
REMOTE CONTROL CODE DISPLAY
The reception code of the remote control can be checked.
リモコン受信コード表示
The updated dates of the operation, tuner and CEC sections are displayed. /
The updated date of the digital section is displayed. /
The updated dates of the set menu and automatic adjustment sections are displayed. /
The updated dates of the HDMI, XM and DOCK (iPod) display sections are displayed. /
The updated date of the DAB/VIDEO conversion section is displayed. /
MAIN / SUB, 2, 3, 4
The updated date of the microprocessor firmware is dis-
played.
MAIN / SUB、2、3、4
Protect Hist
RemoCode -
07.06.29b/Ope1
07.06.29E/Digi
07.06.29G/Ope2
07.06.29A/Ope3
07.06.29A/Ope4
CEC (Consumec Electronics Control)CODE OUTPUT
Not applied to these models.
CEC 232C [OFF]
CECコード出力
Version
Updated date