Service manual
Table Of Contents
- CONTENTS
- TO SERVICE PERSONNEL
- FRONT PANELS
- REAR PANELS
- REMOTE CONTROL PANELS
- SPECIFICATIONS
- INTERNAL VIEW
- SET MENU TABLE
- SERVICE PRECAUTIONS
- DISASSEMBLY PROCEDURES
- UPDATING FIRMWARE
- SELF-DIAGNOSTIC FUNCTION
- Starting Self-Diagnostic Function
- Starting Self-Diagnostic Function in the protection cancel mode
- Canceling Self-Diagnostic Function
- Display provided when Self-Diagnostic Function started
- Display during Self-Diagnostic Function operation
- Operation procedure of Main menu and Sub-menu
- Functions in Self-Diagnostic Function mode
- Initial settings used to start Self-Diagnostic Function
- Details of Self-Diagnostic Function menu
- 1. DSP THROUGH
- 2. RAM THROUGH
- 3. PRO LOGIC / Neo:6
- 4. MIC CHECK
- 5. VFD CHECK
- 6. MANUAL TEST
- 7. RS-232C
- 8. FACTORY PRESET
- 9. AD DATA CHECK
- 10.IF STATUS (Input function status)
- 11.DOCK CHECK
- 12.XM CHECK
- 13.DAB CHECK
- 14.HDMI AUDIO
- 15.HDMI INFORMATION
- 16.HDMI SELECT
- 17.VIDEO CONVERSION
- 18.MODEL
- 19.VERSION/CHECK SUM
- 20.DATE
- 21. DSP CHECK
- DISPLAY DATA
- IC DATA
- BLOCK DIAGRAM
- PRINTED CIRCUIT BOARDS
- PIN CONNECTION DIAGRAMS
- SCHEMATIC DIAGRAMS
- REPLACEMENT PARTS LIST
- REMOTE CONTROL
- Adjusting the system parameters
YSP-500/HTY-750
40
YSP-500/HTY-750
13.DAB CHECK
Not applied to these models.
DAB SCL
DLS (Dynamic Label Segment)
SIGNAL QUALITY
DAB SCAN
SCL:
DLS:
Signal Q.:
DAB MODULE VERSION 0-7
V-0:
V-7:
V-1:
DAB SCAN
SCL:
1 kHz, -1 dB / 44.1 kHz
1 kHz, -61 dB / 44.1 kHz
Mute / 44.1 kHz
XM tone / 44.1 kHz
ISO tone / 44.1 kHz
1 kHz, -1 dB / 32.0 kHz
1 kHz, -61 dB / 32.0 kHz
Mute / 32.0 kHz
XM tone / 32.0 kHz
ISO tone / 32.0 kHz
XM bus power: OFF
Mute /44
XM Tone/44
ISO Tone/44
1k - 1dB/32
1k -61dB/32
Mute /32
XM Tone/32
ISO Tone/32
Bus Power:OFF
12.XM CHECK
Not applied to these models.
1k -61dB/44
1k - 1dB/44
11.DOCK:NG NNN
11.DOCK CHECK
Not applied to these models.