Service manual

YSP-500/HTY-750
30
YSP-500/HTY-750
• Functions in Self-Diagnostic Function
mode
In addition to the self-diagnostic function items, functions
as listed below are available.
• Input selection
• Muting
• Level adjustment
• Power on/off
• Master volume
* Functions related to the set menu are not available.
• Initial settings used to start Self-Diag-
nostic Function
The following initial settings are used when starting self-
diagnostic function.
When self-diagnostic function is canceled, these settings
are restored to those before starting self-diagnostic func-
tion.
• Master volume: 30 (-40dB)
• Input: TV/STB
• Effect level: 0dB
• Audio mute: OFF
• Main menu: DSP THR ALL
● ダイアグ中の機能

 
 
 
 
 
 
● ダイアグ開始時の初期設定


 
 
 
 
 
Main menu selection

Sub-menu selection

ENTER
• Display during Self-Diagnostic Func-
tion operation
During the self-diagnostic function operation, the menu list
described in the section of the startup screen appears on
the TV screen and the function at work is indicated on the
FL display. The contents displayed during the function op-
eration are described later in the section on details of func-
tions.
• Operation procedure of Main menu and
Sub-menu
There are 21 main menu items, each of which has some
sub-menu items.
Main menu selection
Select the main menu by using the UP/DOWN “ ” (Re-
verse) “
” (Forward) key of the remote control.
Sub-menu selection
Select the sub-menu by using the LEFT/RIGHT “ ”
(Reverse) “
” (Forward) keys.
● ダイアグ動作中の表示




● メインメニューとサブメニューの操作


メインメニューの選択
  

サブメニューの選択
  
