Service manual
Table Of Contents
- CONTENTS
- TO SERVICE PERSONNEL
- FRONT PANELS
- REAR PANELS
- REMOTE CONTROL PANELS
- SPECIFICATIONS
- INTERNAL VIEW
- SET MENU TABLE
- SERVICE PRECAUTIONS
- DISASSEMBLY PROCEDURES
- UPDATING FIRMWARE
- SELF-DIAGNOSTIC FUNCTION
- Starting Self-Diagnostic Function
- Starting Self-Diagnostic Function in the protection cancel mode
- Canceling Self-Diagnostic Function
- Display provided when Self-Diagnostic Function started
- Display during Self-Diagnostic Function operation
- Operation procedure of Main menu and Sub-menu
- Functions in Self-Diagnostic Function mode
- Initial settings used to start Self-Diagnostic Function
- Details of Self-Diagnostic Function menu
- 1. DSP THROUGH
- 2. RAM THROUGH
- 3. PRO LOGIC / Neo:6
- 4. MIC CHECK
- 5. VFD CHECK
- 6. MANUAL TEST
- 7. RS-232C
- 8. FACTORY PRESET
- 9. AD DATA CHECK
- 10.IF STATUS (Input function status)
- 11.DOCK CHECK
- 12.XM CHECK
- 13.DAB CHECK
- 14.HDMI AUDIO
- 15.HDMI INFORMATION
- 16.HDMI SELECT
- 17.VIDEO CONVERSION
- 18.MODEL
- 19.VERSION/CHECK SUM
- 20.DATE
- 21. DSP CHECK
- DISPLAY DATA
- IC DATA
- BLOCK DIAGRAM
- PRINTED CIRCUIT BOARDS
- PIN CONNECTION DIAGRAMS
- SCHEMATIC DIAGRAMS
- REPLACEMENT PARTS LIST
- REMOTE CONTROL
- Adjusting the system parameters
YSP-500/HTY-750
26
YSP-500/HTY-750
Sub-menu
29. Y 31 (Not applied to these models. / )
30. Y 32 (Not applied to these models. / )
31. MTT
1. LOOP TEST/ACC PWR/CONNECT
1. 1 dB / 1 KHz (44.1 kHz)
2. -61 dB / 1 KHz (44.1 kHz)
3. Mute (44.1 kHz)
4. XM TONE (44.1 kHz)
5. ISO TONE (44.1 kHz)
6. 1 dB / 1 KHz (32 kHz)
7. -61 dB / 1 KHz (32 kHz)
8. Mute (32 kHz)
9. XM TONE (32 kHz)
10. ISO TONE (32 kHz)
11. Bus Power OFF
1. SCL DISPLAY
2. DSL DISPLAY
3. SIGNAL QUALITY
4. DAB F/W VERSION
5. DAB F/W VERSION 1-10
6. DAB F/W VERSION 11-20
7. DAB F/W VERSION 21-30
8. DAB F/W VERSION 31-40
9. DAB F/W VERSION 41-50
10. DAB F/W VERSION 51-60
11. DAB F/W VERSION 61-64
12. DAB SCAN
1. SPDIF
1. HDMI MODEL NAME
2. SELF PRODUCT ID
3. SELF VENDOR NAME
4. CEC RECEIVE DATA
1. NONE
2. IN 1
3. IN 2
4. DECODER
1. I2C CHECK
2. DIGITAL COMP
3. DIGITAL CVBS
4. DIGITAL Y/C
5. ANALOG BYPASS
6. TEST PATTERN
7. VIDEO INFO
1. MODEL NAME
2. TUNER DESTINATION
3. VIDEO FORMAT
1. VERSION (DSP ALL)
2. CHECKSUM (ALL BOOT)
3. CEC UPDATE (Not applied to these models. / )
4. CEC CPU VERSION DISPLAY (Not applied to these models. / )
1. OPE 1
2. DIGI
3. OPE 2
4. OPE 3
5. OPE 4
6. PROTECT
7. CEC CODE OUT (Not applied to these models. / )
8. REMOTE CONTROL CODE
1. Tx Test Ch
2. Tx Test
3. T1 CHECK
4. T2 CHECK (Not applied to these models. / )
5. RS232C BOOT
6. Cert. Mode
7. T1V
8. T1D (Not applied to these models. / )
9. APP (Not applied to these models. / )
10. CSC (Not applied to these models. / )
11. SPD (Not applied to these models. / )
12. VR1 (Not applied to these models. / )
13. T1 Write
No. Main menu
DOCK CHECK
(Not applied to these models. /
)
XM CHECK
(
Not applied to these models. /
)
DAB CHECK
(Not applied to these models. /
)
HDMI AUDIO
(
Not applied to these models. /
)
HDMI INFORMATION
(Not applied to these models. /
)
HDMI SELECT
(Not applied to these models. /
)
VIDEO CONVERSION
(Not applied to these models. /
)
MODEL
ROM VERSION / SUM
DATE
DSP CHECK
11
12
13
14
15
16
17
18
19
20
21