Owner`s manual

TABLE OF FUNCTIONS

MODE MENU (Function) PARAMETER Preset value Step of

(Category) (Control range/Choices) (Position) change

A 1. CENTER DELAY 0 ms to 5 ms 0 ms 1 ms

2. SURROUND DELAY 0 ms to 15 ms 5 ms 1 ms

3. DYNAMIC RANGE MAX/STANDARD MAX –

4. HIGH LEVEL CUT SCALE

* 0.0 to 1.0 1.0 0.2

5. LOW LEVEL BOOST SCALE

* 0.0 to 1.0 1.0 0.2

B 1. TEST: OFF/ON LEFT/CENTER/RIGHT/ OFF –

RIGHT SURROUND/

LEFT SURROUND

2. LEFT SURROUND LEVEL –6 dB to +6 dB 0 dB 1 dB

3. RIGHT SURROUND LEVEL –6 dB to +6 dB 0 dB 1 dB

4. LFE MIX LEVEL MUTE, –20 dB to 0 dB 0 dB 1 dB

5. OUTPUT TRIM –9 dB to 0 dB 0 dB 0.5 dB

C 1. INPUT RF/OPTICAL/COAXIAL RF –

2. CENTER SPEAKER SMALL/LARGE/PHANTOM SMALL –

3. REAR SPEAKERS SMALL/LARGE SMALL –

4. MAIN SPEAKERS SMALL/LARGE LARGE –

5. LFE/BASS OUT MAIN/SUBWOOFER MAIN –

The following 15 functions on this unit allows you to change several adjustments and mode settings for enhancing the performance

of your audio system including this unit. For adjustment or mode setting change on each menu function, refer to page 10–17.

Note

: Items A4 and A5 are adjustable only when item A3 is set to “STANDARD”.

Memory back up

Parameter changes you made the last time will remain memorized even if the power of this unit is switched off or the power cord

is disconnected. However, if the power is not supplied for more than about two weeks, all parameters will be automatically

changed back to the original settings.