User Manual

Maintenance screen

Reference Manual

TF Series

Channel Color Calibration screen

You can adjust the colors of the LEDs as desired. LED colors are adjusted one at a time.

1 Color buttons

Allow you to select a color.

2 RGB knobs

Allow you to adjust the color.

3 Apply button

Applies the settings and exits.

4 Reset All button

Starts the calibration.

Touch to display the confirmation message. Touch the OK button to perform the

operation.

Calibrating the faders

1. Press the [SEL] key on the top panel that corresponds to the fader you want to

calibrate.

2. Touch the START button on the FADER CALIBRATION MODE screen.

3. Touch the OK button when the confirmation message is displayed.

4. When calibration has finished, touch the APPLY button.

5. Touch the Exit button in the maintenance menu and start up the console as usual.

NOTE

• This feature automatically calibrates the specified fader (channel strip or master section fader).

• When calibration is complete, you can continue to use other maintenance features without exiting.

ղճմ