User Manual

Configuration screens
Reference Manual
TF Series
-
65
-
SEND FROM screen
Allows you to send signals from the input channels.
1 ON button
Determines whether a signal is sent (on) or not sent (off) from the corresponding input
channel.
2 Send pan slider
Adjusts the pan of the input channel signal that is sent.
For AUX 1–8, this slider is only displayed if the signal type is set to stereo.
3 Send level slider
Determines the amount of signal sent from the corresponding input channel.
4 Pre button
Allows you to select whether the pre-fader or post-fader signal is sent from the
corresponding input channel.
On: Before the fader
Off: After the fader
SEND FROM screen menu
Press the Menu key ( ) from the SEND FROM screen to display the following options.
ձ
ճ
ղ
մ
Adjusting the SEND FROM level
1. Touch the ON button for the input channels
that you want to send.
2. Touch the send pan slider, and then use the
[TOUCH AND TURN] knob to adjust the pan
of the input channel signal that is sent.
3. Drag the send level sliders to adjust the
amount of input channel signal that is sent.
1 All Pre icon
Turns on all Pre buttons.
2 All Post icon
Turns off all Pre buttons.
Send level slider
Send pan slider
ON button
Pre button
ձ
ղ