Specifications

Troubleshooting
56 CP5/CP50 Owner’s Manual
Appendix
No sound is produced by your CP5 or CP50 when a sequence is played
on a connected computer or MIDI device.
 Confirm that the channel being used by the computer to transmit MIDI data matches the stage
piano’s receive channel.
Transmission and reception of data using the Bulk Dump function is not
working.
 If you are having trouble transmitting data, ensure that the stage piano’s device number setting
matches the device number of the connected MIDI device.
 If you are having trouble receiving data, ensure that the device number setting is identical to that
used when sending the data.
Data cannot be saved on a USB flash-memory device.
 Ensure that the USB flash-memory device is not write protected.
 Ensure that the USB flash-memory device is correctly formatted.
 Ensure that you are using a type of USB flash-memory device supported by your CP5 or CP50
(page 25).
 Ensure that the USB flash-memory device is not connected via a USB hub.
Connection via USB hubs is not supported (page 25).
Press the [UTILITY] button  Jump to Page 5 by pressing the [5] button  Turn Knob 1 to set the RcvCh parameter appropriately.
Press the [UTILITY] button  Jump to Page 6 by pressing the [6] button  Turn Knob 1 to set the DevNo. parameter appropriately.
Press the [UTILITY] button  Jump to Page 6 by pressing the [6] button  Turn Knob 1 to set the DevNo. parameter appropriately  Press
the [STORE] button to store this setting (page 51).
Press the [FILE] button  Jump to Page 2 by pressing the [2] button  Press Knob 2 to format the USB flash-memory device. (See the
Reference Manual pdf document for more details.)