Specifications

Creating Original Performances
CP5/CP50 Owner’s Manual
35
Quick Start Guide
10 Repeat the above process from Step 6 for any other part blocks that you wish to configure. When all of the required
settings have been made, proceed to Step 11.
11 Press and hold the Part button (for at least one second) for the currently selected part.
The currently selected part is indicated by lighting of the lamp to the bottom-right of one of the Part Volume knobs
(i.e., [LEFT1], [LEFT2], [RIGHT1], or [RIGHT2] on the CP5; [LEFT] or [RIGHT] on the CP50.) As a result of this action,
the part’s parameter setting page will be displayed.
12 Press the [L PAGE] and [PAGE R] buttons to navigate between the screen’s pages, and turn the knobs to modify
parameters as required.
NOTE For more details regarding the parameters on these pages, refer to the Reference Manual pdf document.
13 Repeat the above process from Step 2 for each left and right part that you wish to configure. When the setting of
these parts has been completed, proceed to Step 14.
14 Press the [COMMON] button.
The Common Settings screen will be displayed.
15 Press the [L PAGE] and [PAGE R] buttons to navigate between the screen’s pages, and turn the knobs to modify
parameters as required.
NOTE For more details regarding the parameters on these pages, refer to the Reference Manual pdf document.
NOTE For details regarding the setting of names, refer to the Basic Operations section above (page 20).
16 Press and hold the [REVERB] button (for at least one second).
The Reverb screen will be displayed.
NOTE You can also jump to the Reverb screen by holding down the [EXIT/jump to edit] button and pressing the [REVERB] button.
17 Press the [L PAGE] or [1] button to ensure that Page 1 is displayed.
18 Turn Knob 1 to select a reverb type.
Volume Pan RevSend
E
100 L63 127
Knob 1 Knob 2 Knob 3
Name=[CP Perf1 ] E
(Cursor) (Data)
Knob 1 Knob 2 Knob 3
RevType E
RichHal l
Page 1