User Manual

CP4 STAGE/CP40 STAGE Data List
37
Bank Select
MIDI Data Table
Available Bank Select/Program Change
Parameter Base Address
pp: Part Number
zz: Zone Number
“Top Address” indicates the top address of each block designated by bulk dump operation.
“Byte Count” indicates the data size contained in each block designated by bulk dump
operation.
The Block from the Bulk Header to the Bulk Footer of the Performance can be received
regardless their order.
They can be received even if all of them are not transmitted.
They cannot be received if the irrelevant Block is included.
To execute 1 Performance bulk dump request, designate its corresponding Bulk Header
address.
For the information about “mm” and “nn” shown in the following list, refer to MIDI
PARAMETER CHANGE TABLE (BULK CONTROL).
CP4 STAGE: Part 1 = MAIN Part, Part 2 = LAYER Part, Part 3 = SPLIT Part
CP40 STAGE: Part 1 = MAIN Part, Part 2 = SPLIT/LAYER Part
n: Device Number
id: Model ID
bh: Byte Count High
bl: Byte Count Low
ah: Parameter Address High
am: Parameter Address Middle
al: Parameter Address Low
dt: Data
cc: Check Sum of Data
MSB (HEX) LSB (HEX)
Program No.
Type Memory Description
CP4 STAGE CP40 STAGE
63 3F 0 00 0 – 14 0 – 14 Normal Voice Preset 1 A.PIANO1
1 01 0 – 14 Preset 2 A.PIANO2 (CP4 STAGE only)
2 02 0 – 14 Preset 3 A.PIANO3 (CP4 STAGE only)
3 03 0 – 14 0 – 34 Preset 4 E.PIANO1
4 04 0 – 5 Preset 5 E.PIANO2 (CP4 STAGE only)
5 05 0 – 25 Preset 6 E.PIANO3 (CP4 STAGE only)
6 06 0 – 16 0 – 16 Preset 7 CLAV
7 07 0 – 49 0 – 31 Preset 8 ORGAN
8 08 0 – 22 0 – 12 Preset 9 CH.PERC
9 09 0 – 28 0 – 20 Preset 10 STRINGS
10 0A 0 – 10 0 – 6 Preset 11 CHOIR
11 0B 0 – 45 0 – 38 Preset 12 PAD
12 0C 0 – 45 0 – 33 Preset 13 SYNTH
13 0D 0 – 42 0 – 30 Preset 14 BRASS
14 0E 0 – 56 0 – 33 Preset 15 GUIT/BASS
15 0F 0 – 4 0 – 4 Preset 16 OTHERS
32 20 0 – 13 0 – 13 Drum Voice PreDrum OTHERS: DRUM
63 3F 80 50 0 – 127 Performance User
Parameter Block DescriptionTop Address
High Mid Low
SYSTEM 00 00 00 System
00 05 00 Sequencer Setup
00 20 00 Master EQ
00 21 00 Master Comp
BULK CONTROL 0E 00 00 Header
0F 00 00 Footer
STORE TO FLASH 11 00 00 Store To Flash
PERFORMANCE COMMON 36 00 00 Common
36 01 00 Reverb
36 02 00 Chorus
PERFORMANCE PART 37 pp 00 Part (pp = 00 – 02 (CP4 STAGE),
00 – 01 (CP40 STAGE))
38 pp 00 Insertion A (pp = 00 – 02 (CP4 STAGE),
00 – 01 (CP40 STAGE))
39 pp 00 Insertion B (pp = 00 – 02 (CP4 STAGE),
00 – 01 (CP40 STAGE))
PERFORMANCE ZONE 3A zz 00 Zone (zz = 00 – 03)
Parameter Block Description
Byte Count Top Address
Dec Hex High Mid Low
SYSTEM System 48 30 00 00 00
Sequencer Setup 16 10 00 05 00
Master EQ 20 14 00 20 00
Master Comp 40 28 00 21 00
PERFORMANCE Bulk Header 0 00 0E mm nn
COMMON Common 30 1E 36 00 00
Reverb 40 28 36 01 00
Chorus 41 29 36 02 00
PART Part 1 72 48 37 00 00
::
Part 3 02
Part 1 Insertion A 40 28 38 00 00
::
Part 3 Insertion A 02
Part 1 Insertion B 40 28 39 00 00
::
Part 3 Insertion B 02
ZONE Zone 1 16 10 3A 00 00
::
Zone 4 03
Bulk Footer 0 00 0F mm nn
Message Type Data
Parameter Change F0, 43, 1n, id, id, ah, am, al, dt, … F7
Parameter Request F0, 43, 3n, id, id, ah, am, al, F7
Bulk Dump F0, 43, 0n, id, id, bh, bl, ah, am, al, dt, …, cc, F7
Bulk Request F0, 43, 2n, id, id, ah, am, al, F7
Bulk Dump Block