User Manual

CP4 STAGE/CP40 STAGE Data List
18
Effect Parameter List
• Delay L, C, R
• Delay L, R (STEREO)
Category – CHORUS
• G Chorus
*2 Insertion Block only.
• 2 Modulator
*2 Insertion Block only.
• SPX Chorus
*2 Insertion Block only.
• Ensemble Detune
Category – FLANGER
• Classic Flanger
• Tempo Flanger
*2 Insertion Block only.
No. Parameter Range Value Table No. C trl
1 Delay Time L 0.1ms – 1638.3ms 1 – 16383
2 Delay Time R 0.1ms – 1638.3ms 1 – 16383
3 Delay Time C 0.1ms – 1638.3ms 1 – 16383
4 Feedback Time 0.1ms – 1638.3ms 1 – 16383
5 Feedback Level -63 – +63 1 – 127
6 Delay Level C 0 – 127 0 – 127
7 Feedback High Damp 0.1 – 1.0 1 – 10
8—
9—
10 Dry/Wet Balance D63>W – D=W – D<W63 1 – 127 
11 —
12 —
13–16: Same as the parameters shaded in gray in Cross Delay on page 17.
No. Parameter Range Value Table No. C trl
1 Delay Time L 0.1ms – 1638.3ms 1 – 16383
2 Delay Time R 0.1ms – 1638.3ms 1 – 16383
3 Feedback Time L 0.1ms – 1638.3ms 1 – 16383
4 Feedback Time R 0.1ms – 1638.3ms 1 – 16383
5 Feedback Level -63 – +63 1 – 127
6 Feedback High Damp 0.1 – 1.0 1 – 10
7—
8—
9—
10 Dry/Wet Balance D63>W – D=W – D<W63 1 – 127 
11 —
12 —
13–16: Same as the parameters shaded in gray in Cross Delay onpage 17.
No. Parameter Range Value Table No. C trl
1 LFO Speed 0.0Hz – 39.70Hz 0 – 127 1
2—
3 PM Depth 0 – 127 0 – 127
4 Feedback Level -63 – +63 1 – 127
5 Delay Offset 0.0ms – 50.0ms 0 – 127 2
6–9: Same as the parameters shaded in gray in Cross Delay on page 17.
10 Dry/Wet Balance D63>W – D=W – D<W63 1 – 127 
11 EQ Mid Frequency (*2) 100Hz – 10.0kHz 14 – 54 3
12 EQ Mid Gain (*2) -12dB – +12dB 52 – 76
13 EQ Mid Width (*2) 0.1 – 12.0 1 – 120
14 —
15 Input Mode Mono, Stereo 0 – 1
16 —
No. Parameter Range Value Table No. C trl
1 LFO Speed 0.0Hz – 39.70Hz 0 – 127 1
2 AM Depth 0 – 127 0 – 127
3 PM Depth 0 – 127 0 – 127
4 Feedback Level -63 – +63 1 – 127
5 Delay Offset 0.0ms – 50.0ms 0 – 127 2
6–9: Same as the parameters shaded in gray in Cross Delay on page 17.
10 Dry/Wet Balance D63>W – D=W – D<W63 1 – 127 
11 EQ Mid Frequency (*2) 100Hz – 10.0kHz 14 – 54 3
12 EQ Mid Gain (*2) -12dB – +12dB 52 – 76
13 EQ Mid Width (*2) 0.1 – 12.0 1 – 120
14 —
15 Input Mode Mono, Stereo 0 – 1
16 —
No. Parameter Range Value Table No. C trl
1 LFO Speed 0.0Hz – 39.70Hz 0 – 127 1
2 LFO Depth 0 – 127 0 – 127
3 Feedback Level -63 – +63 1 – 127
4 Delay Offset 0.0ms – 50.0ms 0 – 127 2
5—
6–9: Same as the parameters shaded in gray in Cross Delay on page 17.
10 Dry/Wet Balance D63>W – D=W – D<W63 1 – 127 
11 EQ Mid Frequency (*2) 100Hz – 10.0kHz 14 – 54 3
12 EQ Mid Gain (*2) -12dB – +12dB 52 – 76
13 EQ Mid Width (*2) 0.1 – 12.0 1 – 120
14 —
15 Input Mode Mono, Stereo 0 – 1
16 —
No. Parameter Range Value Table No. C trl
1 Detune -50cent – +50cent 14 – 114
2 Initial Delay Lch 0.0ms – 50.0ms 0 – 127 2
3 Initial Delay Rch 0.0ms – 50.0ms 0 – 127 2
4 Spread 0 – 63 0 – 63
5—
6—
7—
8—
9—
10 Dry/Wet Balance D63>W – D=W – D<W63 1 – 127 
11–14: Same as the parameters shaded in gray in Cross Delay on page 17.
15 —
16 —
No. Parameter Range Value Table No. C trl
1 LFO Speed 0.0Hz – 39.70Hz 0 – 127 1
2 LFO Depth 0 – 127 0 – 127
3 LFO Wave Triangle, Sine 0 – 1
4 Delay Offset 0.09 – 36.21ms 0 – 139 20
5 Feedback Level -100 – +100% 0 – 200
6–9: Same as the parameters shaded in gray in Cross Delay on page 17.
10 Dry/Wet Balance D63>W – D=W – D<W63 1 – 127 
11 EQ Mid Frequency 100Hz – 10.0kHz 14 – 54 3
12 EQ Mid Gain -12dB – +12dB 52 – 76
13 EQ Mid Width 0.1 – 12.0 1 – 120
14 Modulation Phase -180 – +180 0 – 16 21
15 Feedback High Damp 0.1 – 1.0 1 – 10
16 Analog Feel 0 – 10 0 – 10
No. Parameter Range Value Table No. C trl
1 LFO Speed 16th – 4thx16 5 – 29 14
2 LFO Depth 0 – 127 0 – 127
3 Feedback Level -63 – +63 1 – 127
4 Delay Offset 0.0ms – 50.0ms 0 – 127 2
5—
6–9: Same as the parameters shaded in gray in Cross Delay on page 17.
10 Dry/Wet Balance D63>W – D=W – D<W63 1 – 127 
11 EQ Mid Frequency (*2) 100Hz – 10.0kHz 14 – 54 3
12 EQ Mid Gain (*2) -12dB – +12dB 52 – 76
13 EQ Mid Width (*2) 0.1 – 12.0 1 – 120
14 LFO Phase difference -180deg – +180deg 4 – 124
15 —
16 —