User Manual

49 CP4 STAGE/CP40 STAGE Reference Manual
Design of the CP4 STAGE & CP40 STAGE
Reference
Performances
Editing Performances
Common Edit Area
01: Chorus Effect
02: Reverb Effect
03: General
04: Name
Part Edit Area
01: Play Mode
02: Filter/EG
03: Effect-A
04: Effect-B
05: Controller
06: Receive Switch
Master Keyboard Area
Job Area
01: Recall
02: Copy
03: Bulk
Store Performance Function
Compare Performance Function
File Area
01: Save
02: Load
03: Rename
04: Delete
05: Format
06: Memory Info
Utility Area
01: General
02: MIDI
03: Controller
04: MasterComp
05: Master EQ
06: Panel Lock
Utility Job Area
01: Factory Set
02: Version
Appendix
3 Are you sure?
This message is displayed before executing the Factory Set function. Press the [+1/YES] button to
proceed. Alternatively, press the [-1/NO] button to return to the previous screen.
NOTICE
If you set PowerOn Auto to “on” before executing the Factory Set function, the function will then execute
automatically whenever you subsequently turn on your stage piano. As this can result in the loss of
important settings and data, we recommend that this parameter normally be set to “off”. If you change the
PowerOn Auto setting from “on” to “off”, you must execute the Factory Set function in this condition to
store the new setting.
02: Version
The Version screen can be used to review the current versions of the stage piano’s boot loader and
firmware in addition to copyright information.
NOTE The Utility menu is the first screen displayed when the [UTILITY] button is pressed.
02: Version selected in Step 3:
1 Job Version
This shows that you are on the Utility area’s Version screen.
2 Boot: (version number) Firm: (version number)
This shows the current versions of the stage piano’s boot loader and firmware.
3 (C)2013 Yamaha Corp.
This shows the owner of the copyright for the stage piano’s boot loader and firmware.
Procedure 1. Press the [UTILITY] button.
2. On the Utility menu, use the [d] button to select 07: Job, and then press the [ENTER] button.
3. Use the [d] button to select 02: Version, and then press the [ENTER] button.
Job Boot:1
Version (C)2
.00 Firm:1.00
013 Yamaha Corp.
1 3
2