User Manual

33 CP4 STAGE/CP40 STAGE Reference Manual
Design of the CP4 STAGE & CP40 STAGE
Reference
Performances
Editing Performances
Common Edit Area
01: Chorus Effect
02: Reverb Effect
03: General
04: Name
Part Edit Area
01: Play Mode
02: Filter/EG
03: Effect-A
04: Effect-B
05: Controller
06: Receive Switch
Master Keyboard Area
Job Area
01: Recall
02: Copy
03: Bulk
Store Performance Function
Compare Performance Function
File Area
01: Save
02: Load
03: Rename
04: Delete
05: Format
06: Memory Info
Utility Area
01: General
02: MIDI
03: Controller
04: MasterComp
05: Master EQ
06: Panel Lock
Utility Job Area
01: Factory Set
02: Version
Appendix
02: Load
The Load function is used to read a file from a USB flash-memory device into the instrument.
NOTE Before carrying out the steps described below, ensure that the USB flash-memory device is plugged
into the instrument’s [TO DEVICE] USB terminal. If this is not the case, the instrument will display the
message “USB device not ready” instead of the Load screen.
NOTE The Load function can only be used to read All-type files located in the USB flash-memory device’s root
directory. If no such file exists in the root directory, the instrument will display the message “File not
found” instead of the Load screen.
NOTE The File menu is the first screen displayed when the [FILE] button is pressed.
NOTE As shown in the following table, the load type indicates which data from the selected file is to be read
into the instrument.
Load types
Procedure 1. Press the [FILE] button.
2. On the File menu, use the [d] and [u] buttons to select 02: Load, and then press the
[ENTER] button.
3. Use the [-1/NO] and [+1/YES] buttons or the Data Dial to select a file and load type, and then
press the [ENTER] button.
4. Carry out the steps for the selected load type as described below.
Format Description
All
All data will be loaded from the selected All-type file (.C7A (CP4 STAGE) or
.C8A (CP40 STAGE) file extension).
All without Sys
(All without System)
All data other than Utility settings will be loaded from the selected All-type
file (.C7A (CP4 STAGE) or .C8A (CP40 STAGE) file extension).
Performance
One specific Performance will be loaded from the selected All-type file
(.C7A (CP4 STAGE) or .C8A (CP40 STAGE) file extension).