User Manual

Voice mode
Performance
mode
Song mode Utility mode File mode Master mode
Pattern mode
Mixing Voice
mode
Reference
Pattern Job mode
200
Owner’s Manual
03: Mix Phrase
This Job mixes all data from two selected user phrases
(“A” and “B”), and places the result in phrase B.
04: Append Phrase
This Job appends one phrase (A) to the end of another (B)
to create one longer phrase (B).
05: Split Phrase
This Job splits a selected phrase (A) into two separate
phrases (A and B).
The data before the split point is stored to the original phrase
A and the data after the split point is moved and stored to
another phrase B. You can also set the Meters of the phrase
A and B after the Split Phrase Job.
n When either Pattern or Phrase is set to “off,” the split Phrase B
data is erased.
The Job overwrites any data already existing in destination phrase B.
06: Get Phrase From Song
This Job copies a segment of sequence-track
data from a Song into the designated destination
phrase.
After specifying the source Song/track/range of
measures to be copied and the destination
phrase, press the [ENTER] button to execute this
Job.
The Job overwrites any data already existing in
the destination phrase.
07: Put Phrase To Song
This Job copies a selected user phrase into a
specified area of a selected song.
After specifying the source phrase and destination
Song/track/top measure, press the [ENTER]
button to execute this Job.
The Job overwrites any data already existing in
the destination track.
08: Clear Phrase
This Job deletes all data from the selected phrase.
09: Phrase Name
This Job lets you assign a name (of up to eight characters) to the selected phrase.
For instructions on naming, refer to page 38 in the Basic Operation section.
[F5] TRACK (Track Job)
01: Copy Track
This Job copies all data from a specified source
track to the specified destination track.
The types of data to be copied are the same as in
the Song Job mode. See page 188.
02: Exchange Track
This Job exchanges or “swaps” the specified type
of data between two specified tracks in the current
Pattern and section. The types of data to be
exchanged are the same as in the Song Job
mode. See page 188.
Phrase A
Phrase B
Phrase B
Mix Phrase
Phrase A
Phrase B
Append Phrase
Phrase A
Phrase B
Phase A is divided at the Split Point
Phrase A
CAUTION
Source Song, track, and range of
measures to be copied. Destination phrase
CAUTION
Source phrase
Destination Song, track,
and top measures
CAUTION
Source Pattern,
section, and track
Types of data to be copied
Destination Pattern,
section, and track
Target tracks for the Exchange operation
Types of data to be exchanged