Owner manual
Table Of Contents
- PRECAUTIONS
- Table of contents
- Application Index Use this index to find reference pages that may be helpful for your application...
- Handling the Floppy Disk Drive(FDD) and Floppy Disk
- Maintenance
- Included Accessories
- Features
- Before Using the Clavinova
- Part Names
- Listening to the Demonstration Tunes
- Listening to 50 Piano Preset Songs
- Selecting and Playing Voices
- Recording Your Performance
- Saving Recorded Songs and Handling the Files...[FILE]
- Clavinova memory
- Basic file operation
- Saving recorded or other songs to Clavinova Storage memory...[SaveToMemory]
- Saving recorded or other songs to floppy disk...[SaveToDisk]
- Deleting songs in Clavinova Storage memory or a floppy disk...[DeleteSong]
- Renaming a song...[RenameSong]
- Copying data from one floppy disk to another...[CopyDisk]
- Formatting a floppy disk...[FormatDisk]
- Changing the type of characters on screen...[CharacterCode]
- Playing Back Recorded Songs and Commercially-available Music Data
- Connections
- Detailed Settings
- Detailed settings for recording and playback [SONG SETTING]
- Correcting note timing [Quantize]
- Specifying whether playback starts immediately along with the first voicing [QuickPlay]
- Auditioning the channels [ChannelListen]
- Deleting data from each channel [ChannelClear]
- Specifying the range and playing back repeatedly [FromToRepeat]
- Playing back the phrase specified by the phrase number [PhraseMark]
- Playing back a song repeatedly [SongRepeat]
- Detailed settings for the metronome METRONOME [SETTING]
- Detailed settings for the voices [VOICE SETTING]
- Setting the octave [Octave]*
- Setting the volume level [Volume]*
- Setting the position of right and left channels [Pan]*
- Fine tuning the pitch (only in Dual mode) [Detune]
- Selecting the reverb type [ReverbType]
- Setting the reverb depth [ReverbSend]*
- Selecting the chorus type [Chorus Type]
- Setting the chorus depth [ChorusSend]*
- Setting the chorus on/off [ChorusOnOff]
- Selecting the variation effect type [VariationType]
- Setting the variation effect depth [VariationSend]*
- Setting the touch sensitivity [TouchSense]*
- Setting the right pedal function [RPedal]
- Setting the center pedal function [MPedal]
- Setting the left pedal function [LPedal]
- Setting the auxiliary pedal function [AuxPedal]
- MIDI [MIDI SETTING]
- About MIDI
- Setting the MIDI transmit channel [MidiOutChannel]
- Setting the MIDI receive channel (Port A) [MidiInAChannel]
- Setting the MIDI receive channel (Port B) [MidiInAChannel]
- Setting Local control on/off [LocalControl]
- Selecting performance from the keyboard or song data for MIDI transmission [MidiOutSelect]
- Selecting a type of data received via MIDI [ReceiveParameter]
- Selecting a type of data transmitted via MIDI [TransmitParameter]
- Executing song data bulk dump [SongBulkDump]
- Transmitting the initial settings on the panel [InitialSetup]
- Executing voice data bulk dump [VoiceBulkDump]
- About MIDI
- Other settings
- Selecting a touch response [TouchResponse]
- Fine tuning the pitch [Tune]
- Selecting a tuning curve for a piano voice [PianoTuningCurve]
- Selecting a scale [Scale]
- Depth of string resonance [StringResonanceDepth]
- Depth of sustain sampling for the damper pedal [SustainSamplingDepth]
- Setting the speed of vibraphone’s vibrato effect [VibraphoneRotorSpeed]
- Selecting a pedal function for vibraphone [VibraphonePedalMode]
- Assigning the START/PAUSE function to a pedal [PedalStart/ Pause]
- Selecting a type of auxiliary pedal [AuxPedalType]
- Setting the point at which the damper pedal starts to affect the sound [HalfPedalPoint]
- Pitch bend range [PitchBendRange]
- Replacing the XG voices with preset voices [XGAlternative]
- Selecting items saved at shutdown [MemoryBackUp]
- Restoring the normal (default) settings [FactorySet]
- Other method for restoring the normal settings
- Message List
- Questions about Operations and Functions
- Troubleshooting
- Data Compatibility
- Preset Voice List
- Voice Combination Examples (Dual and Split)
- Index
78 CLP-990
Detailed settings for the voices
[VOICE SETTING]
This menu enables you to make various detailed settings for the voices in Dual or Split mode and the effects. You can
make these settings for each voice (or each combination of voices) individually. You can listen to the notes you play
on the keyboard while changing the settings.
Procedure
1. Select a voice and press the [VOICE SETTING] button to access the
“Voice Setting” menu.
2. Press the A [–]/[+] buttons to select the part for which you wish to
change the voice.
The range of the displayed part varies depending on the selected voice.
[Main] MAIN voices (displayed with a single voice or in Split mode)
[Main
× Layer] MAIN Voice 1 and Voice 2 (displayed when the MAIN side is in Dual
mode)
[Left] LEFT voice (displayed in Split mode)
[Left
× Layer] LEFT Voice 1 and Voice 2 (displayed when the LEFT side is in Dual mode)
In Dual mode, parameters with the “*” mark are set for Voice 1 and Voice 2 individually.
You can shift the pitch up and down in octave steps.
See the procedure on page 72.
In Dual mode:
Setting range:
–2 (two octaves lower - 0 (no pitch shift) - +2 (two
octaves higher)
You can set the volume level for each voice part.
See the procedure on page 72.
DEMO SONG SELECT
TRANSPOSE
MASTER VOLUME
TEMPO VOICE EFFECT
SONG
CLP-990
MIN MAX
NEW SONG
SONG BALANCE
UPDOWN
BRILLIANCE
TRACK
1
TRACK
2
EXTRA
TRACKS
FILE METRONOME
CONTRAST
SONG
SETTING
START/ STOP SETTING
SPLIT
POINT
VOICE
SETTING
REVERB
CHORUS MIDI
SETTING
OTHER
SETTING
REC
PIANO
MAIN
LEFT
E. PIANO/
BASS
HARPSI-
CHORD
MALLET ORGAN STRINGS/
CHOIR
STOP
START/
PAUSE
SYNCHRO START
EXIT
PIANO/
E. PIANO
HARPSI/
MALLET
ORGAN/
STRINGS
BASS
A B
C D
NO YES
[VOICE SETTING]
TIP
Setting the octave [Octave]*
A B
C D
NO YES
A B
C D
NO YES
Voice for editing (Voice 1 or Voice 2)
Setting the volume level
[Volume]*
A B
C D
NO YES