Owner manual
Table Of Contents
- PRECAUTIONS
- Table of contents
- Application Index Use this index to find reference pages that may be helpful for your application...
- Handling the Floppy Disk Drive(FDD) and Floppy Disk
- Maintenance
- Included Accessories
- Features
- Before Using the Clavinova
- Part Names
- Listening to the Demonstration Tunes
- Listening to 50 Piano Preset Songs
- Selecting and Playing Voices
- Recording Your Performance
- Saving Recorded Songs and Handling the Files...[FILE]
- Clavinova memory
- Basic file operation
- Saving recorded or other songs to Clavinova Storage memory...[SaveToMemory]
- Saving recorded or other songs to floppy disk...[SaveToDisk]
- Deleting songs in Clavinova Storage memory or a floppy disk...[DeleteSong]
- Renaming a song...[RenameSong]
- Copying data from one floppy disk to another...[CopyDisk]
- Formatting a floppy disk...[FormatDisk]
- Changing the type of characters on screen...[CharacterCode]
- Playing Back Recorded Songs and Commercially-available Music Data
- Connections
- Detailed Settings
- Detailed settings for recording and playback [SONG SETTING]
- Correcting note timing [Quantize]
- Specifying whether playback starts immediately along with the first voicing [QuickPlay]
- Auditioning the channels [ChannelListen]
- Deleting data from each channel [ChannelClear]
- Specifying the range and playing back repeatedly [FromToRepeat]
- Playing back the phrase specified by the phrase number [PhraseMark]
- Playing back a song repeatedly [SongRepeat]
- Detailed settings for the metronome METRONOME [SETTING]
- Detailed settings for the voices [VOICE SETTING]
- Setting the octave [Octave]*
- Setting the volume level [Volume]*
- Setting the position of right and left channels [Pan]*
- Fine tuning the pitch (only in Dual mode) [Detune]
- Selecting the reverb type [ReverbType]
- Setting the reverb depth [ReverbSend]*
- Selecting the chorus type [Chorus Type]
- Setting the chorus depth [ChorusSend]*
- Setting the chorus on/off [ChorusOnOff]
- Selecting the variation effect type [VariationType]
- Setting the variation effect depth [VariationSend]*
- Setting the touch sensitivity [TouchSense]*
- Setting the right pedal function [RPedal]
- Setting the center pedal function [MPedal]
- Setting the left pedal function [LPedal]
- Setting the auxiliary pedal function [AuxPedal]
- MIDI [MIDI SETTING]
- About MIDI
- Setting the MIDI transmit channel [MidiOutChannel]
- Setting the MIDI receive channel (Port A) [MidiInAChannel]
- Setting the MIDI receive channel (Port B) [MidiInAChannel]
- Setting Local control on/off [LocalControl]
- Selecting performance from the keyboard or song data for MIDI transmission [MidiOutSelect]
- Selecting a type of data received via MIDI [ReceiveParameter]
- Selecting a type of data transmitted via MIDI [TransmitParameter]
- Executing song data bulk dump [SongBulkDump]
- Transmitting the initial settings on the panel [InitialSetup]
- Executing voice data bulk dump [VoiceBulkDump]
- About MIDI
- Other settings
- Selecting a touch response [TouchResponse]
- Fine tuning the pitch [Tune]
- Selecting a tuning curve for a piano voice [PianoTuningCurve]
- Selecting a scale [Scale]
- Depth of string resonance [StringResonanceDepth]
- Depth of sustain sampling for the damper pedal [SustainSamplingDepth]
- Setting the speed of vibraphone’s vibrato effect [VibraphoneRotorSpeed]
- Selecting a pedal function for vibraphone [VibraphonePedalMode]
- Assigning the START/PAUSE function to a pedal [PedalStart/ Pause]
- Selecting a type of auxiliary pedal [AuxPedalType]
- Setting the point at which the damper pedal starts to affect the sound [HalfPedalPoint]
- Pitch bend range [PitchBendRange]
- Replacing the XG voices with preset voices [XGAlternative]
- Selecting items saved at shutdown [MemoryBackUp]
- Restoring the normal (default) settings [FactorySet]
- Other method for restoring the normal settings
- Message List
- Questions about Operations and Functions
- Troubleshooting
- Data Compatibility
- Preset Voice List
- Voice Combination Examples (Dual and Split)
- Index
CLP-990 75
Detailed settings for recording and playback [SONG SETTING]
This parameter enables you to specify whether a song
that starts from the middle of a bar, or a song with a
silence prior to the first note, should be played from
the first note or from the top of the bar (rest or blank).
See the procedure on page 72.
Setting range:
[On] Playing from the first note
[Off] Playing from the top of the bar (including a rest
or blank)
You can select a single channel to listen to its contents.
Playback starts from the first note.
See the procedure on page 72.
Setting range:
Ch1 - Ch16
Usually, channels that do not contain any data are not dis-
played. However, for some songs, all channels (including the
channels that contain no data) may be displayed.
You can delete data from each of 16 channels.
See the procedure on page 72.
Setting range:
Ch1 - Ch16, ALL (all channels)
• Channels that do not contain any data are not displayed.
However, for some songs, all channels (including the
channels that contain no data) may be displayed.
• Save the edited song data to memory or disk.
(See page 50.)
You can specify a range (in steps of beats) in a song to
play back repeatedly.
• Playback repeats after it reaches just prior to the beat
specified as the end point.
• If you start playing back a song with “Repeat On”
selected, the count down starts, followed by the
repeated playback of the specified part until you
press the [STOP] button.
• If you select “Repeat Off,” normal playback starts.
See the procedure on page 72.
When you select another song, the specified range is auto-
matically cancelled and the Repeat function is turned off.
Specifying whether playback
starts immediately along with the
first voicing [QuickPlay]
Auditioning the channels [Chan-
nelListen]
A B
C D
NO YES
A B
C D
NO YES
Use these buttons to select the desired channel
for playback.
Playback continues as long
as you press and hold down this button.
TIP
Deleting data from each channel
[ChannelClear]
Specifying the range and playing
back repeatedly [FromToRepeat]
A B
C D
NO YES
Press this button to delete data.
Use these buttons to select the desired channel
for deletion.
TIP
A B
C D
NO YES
Use these buttons
to specify the end point
of the repeated range.
Use these buttons to select “Repeat On.”
Use these buttons
to specify the start point
of the repeated range.
NOTE