Specifications
The
Function
Mode
iii
Dual Mode Functions
------------
After selecting "F 38", press the [+/YES] button to engage the dual-mode function sub-
mode, then use the
FUNCTION [
....
] and [ ... ] buttons
to
select the desired dual mode func-
tion, as listed below.
If
the Dual mode is not engaged "F
3.
- " will appear instead
of
"F
3.'::1"
and the Dual mode
functions cannot
be
selected.
If
this happens engage the Dual mode and proceed.
[ •
~HORTCUT:
You
can
.J.·u.m.
p directly
to
the
dual-mode functions
(F3)
by
pressing
the
[FUNCTION]
button
while
holding
the
two
dual-mode voice selectors.
r!D
NOTE
1 • Dual mode function settings are set individually for each voice combination.
o F3.1: Dual Balance
...................................................
,
................................................................................
.
The volume levels
of
the two voices combined in the dual mode can
be
adjusted
as
re-
quired by using this function. Use the
[-/NO]
and [+IYES] buttons to adjust the balance as
required. The balance range is from 0 through 20. A setting
of
"10"
produces equal balance
between the two dual-mode voices. Settings below "10" increase the volume
of
the 2nd Voice
in relation to the 1st Voice, and settings above "10" increase the volume
of
the 1st Voice in
relation
to
the 2nd Voice ("1st" and "2nd"
is
explained
on
page 16). Press the
[-/NO]
and
[+1
YES]
buttons simultaneously to recall the default setting (different for each voice combina-
tion).,
You
can set one voice as the main voice, and another voice as a softer, mixed voice.
o F3.2: Dual Detune
......................................................................................................................................
.
This function makes it possible
to
detune the 1st and 2nd dual-mode Voices
to
create a
thicker sound. Use the
[-/NO]
and [+/YES] buttons to set the amount
of
detuning as required.
The detune range is from
-10
through 10. A setting
of
"0"
sets both voices to the same pitch.
Settings below
"0"
increase the pitch
of
the 2nd Voice in relation
to
the 1st Voice, and settings
above
"0"
increase the pitch
of
the 1st Voice in relation to the 2nd Voice ("1st" and "2nd" is
explained on page 16). Press the
[-/NO]
and [+/YES] buttons simultaneously
to
recall the
default setting (different for each voice combination).
IdJ
F3.3: 15t Voice Octave Shift
..........................................................................................................
..
.t
D F3.4: 2nd Voice Octave Shift
.........................................................................................................
.
Depending on which voices you combine using the dual mode, the combination may sound
better
if
one
of
the voices is shifted up
or
down an octave. Use the
[-/NO]
and [+IYES]
buttons to set the octave
of
the 1st or 2nd Voice
as
required ("1st" and "2nd" is explained on
page 16). The available settings are
"0"
for normal pitch,
"-1"
to shift the pitch down one
octave, and
"1"
to shift the pitch up one octave. Press the
[-/NO]
and [+IYES] buttons simul-
taneously to recall the default setting (different for each voice combination).