Specifications
A Simple Daisy-chain System
Internal port switches allow the CL series to be easily set up for daisy-chain or star
network congurations. In this example the Console at FOH position is directly
connected to the I/O rack at the side of the stage. The network is self-congured. Of
course the CL StageMix iPad app can be used even in simple systems like this one, and
Dante Virtual Soundcard can be used to enable multitrack recording to a DAW such as
Steinberg's Nuendo Live.
NEXO NXAMP Integration
Install the NXDT104 Dante Network Card in a NEXO NXAMP and it becomes possible to
communicate with CL series consoles. In addition to basic audio transmission via the
Dante network, NXAMP discovery and patching can be controlled from the CL console
touch display. You have Dante networking from input to output, plus signicantly
enhanced overall operability.
A Flexible, Redundant Star Network
Star topologies can be congured with gigabit network switches. In this conguration,
redundant connections to each device on the network ensure that a malfunction in one
cable or network device will not disrupt the entire system. The Gain Compensation
feature allows multiple consoles to control analog gain for a single I/O rack, for seamless
integration of FOH and monitor operation. Multiple computers can be used for live
recording, too.
Live Sound Plus Production Capability
A Nuage Advanced Production System can be merged into a live sound system based on
CL Series consoles and Rio Series I/O units via Dante. This makes it possible to provide a
fully integrated network audio system that can handle both live sound and production in
halls or theaters that have on-site recording rooms, for example. Since automatic gain
compensation can be applied when Rio Series I/O units are used with CL Series consoles,
analog gain adjustments in multiple CL consoles connected to a common Rio unit will not
cause unwanted changes in overall level.
Rio3224 ‐D
Rio3224 ‐D Rio3224 ‐D
SP2060
AES/EBU
Rio3224 ‐D
CL5 PC for Live RecordingCL StageMix
CL StageMix
CL5
CL3
PC for Live Recording
PC for Live Recording
Primary Switch Secondar y Switch
Primary Switch Secondar y Switch
CL StageMix
FoH
PC for Live Recording
Primary Switch
Primary Switch
19
20
Monitor
Wi-Fi
Access
Point
Wi-Fi
Access
Point
Wi-Fi
AccessPoint
DME64N
Dante -MY16-AUD
Ri8‐D
Ro8‐D
CL StageMix
Ri8‐D
Rio1608‐D
Rio3224 ‐D
Rio3224 ‐DRio3224 ‐D
TX6n TX6n
NXAMP
NXDT104
Rio3224 ‐D
NXAMP
NXDT104
Rio1608‐D
CL5
CL5
Monitor
FoH
Control Room
Amplier Room
Recording Room
CL5 CL1
CL3
Primary Switch
Primary Switch
Primary Switch
Primary Switch
Computer
(Nuendo 6)
NUAGE I/O
Ri8‐D
Wi-Fi
Access
Point
System Examples
A comprehensive product lineup and Dante networking make it easy to assemble powerful,
reliable systems for a wide range of applications.
* CL firmware V1.5 or later is required for Ri8-D analog gain control.
* CL firmware V1.5 or later is required for Ri8-D analog gain control.
* CL firmware V1.5 or later is required for Ri8-D analog gain control and NXAMP discovery and patching.
DANTE
ACCELER ATOR
Control
NUAGE FADER
NUAGE MASTER