User Guide

Yamaha Professional Audio CL StageMix V4.5 User Guide
Page 18
4.8.7 Phantom Power
The 48V phantom power status for each input channel is also displayed
at the top of each channel strip when GAIN mode is active. The 48V
indicator will appear in red when phantom power is active.
Phantom Power for each channel can be switched On or Off from
StageMix if the relevant preference is ON in the SETUP screen (refer to
9.6). Tap on the [48V] button and a confirmation popup will appear.
By default, the 48V phantom power indicators are display-only and
cannot be edited from StageMix.
4.8.8 Phase
The Phase setting for each input channel appears near the top of the
channel strips when GAIN mode is active. The Phase setting can be
edited from StageMix by pressing this button. The button will have a
grey background when the Phase setting is normal and will change to
an orange background when Phase is reversed.