User Guide

Yamaha Professional Audio CL StageMix V4.5 User Guide
Page 17
4.8.1 Digital Gain
When Gain Mode is active, the user can also adjust the Digital Gain for
any channel. Press the [DIGITAL] button to assign all StageMix faders
to control the Digital Gain parameters. The background will change to
a blue shade to indicate that Digital Gain mode is active.
4.8.2 Gain Compensation Mode
Gain Compensation can be activated for each input channel
independently in CL series consoles. In Analog Gain mode, a [GC]
button in each channel strip allows Gain Compensation to be turned On
or Off from StageMix.
The [GC] button will only be available for channels that are patched to a
Rio I/O Rack that provides Gain Compensation capability. The [GC]
button will turn blue when Gain Compensation is active for that channel.
In Analog Gain mode, a blue dot will appear next to the fader to indicate
the original Analog gain position. If Gain Compensation is turned off for
a channel, the gain control fader will return to this position. (Refer to
the CL series console’s Owner’s Manual for more detailed information
about Gain Compensation mode and functions.)
4.8.3 Analog Gain / Digital Gain Link
When the [LINK] button is enabled for an input channel, any changes
made to the Analog Gain will be linked to the Digital Gain.
Note: this feature is only available for CL V2.0 firmware or higher.
The [LINK] button will only be available for channels that are patched to
a Rio I/O Rack that provides Gain Compensation capability.
Note: although the [LINK] button may be enabled or disabled at any
time, linking of Analog and Digital Gain only occurs when Gain
Compensation is active for the input to that channel.
4.8.4 ALL GC ON
Press the [ALL GC ON] button to activate Gain Compensation for
every channel in the console that is patched to a Rio I/O Rack input
which provides the Gain Compensation capability. A confirmation
dialog will appear before this function is executed.
4.8.5 ALL GC OFF
Press [ALL GC OFF] to turn off Gain Compensation for all channels. A
confirmation dialog will appear before this function is executed.
4.8.6 Input Port
When GAIN mode is active, the input port assigned to each channel will
be displayed at the top of each channel strip (EQ, Pan and Dynamics
are not displayed when GAIN mode is active). Input Port is a display-
only parameter and cannot be edited from StageMix.