User Manual

Specifications
사용 설명서
Tio1608-D
- 17 -
Input Output Digital I/O Character
Analog input characteristics
Analog output characteristics
Digital input/output specifications
* 본 설명서의 내용은 발행일 현재 최신 사양을 기준으로 하고 있습니다 . 최신 설명서를 가져오려면 Yamaha 웹사이트에 접속 후 해당 설
명서 파일을 다운로드받으십시오 .
Input
Terminals
GAIN
Actual Load
Impedance
For Use With
Nominal
Input Level
Connector
balanced /
Unbalanced
Sensitivity
*1
*1. Sensitivity is the lowest level that will produce an output of +4dBu (1.23V) or the nominal output level when the unit is set to maximum gain.
Nominal Max. before clip
INPUT1-16 +66dB 7. 5kΩ 50-600Ω Mics
or 600Ω Lines
-82dBu
(61.6μV)
-62dBu
(0.616mV)
-42dBu
(6.16mV)
Combo Jack 
(XLR-3-31 type
*2
or
TRS phone
*3
)
*2. 1: GND, 2: HOT, 3: COLD
*3. Tip: HOT, Ring: COLD, Sleeve: GND
Balanced
-6dB -10dBu
(245mV)
+10dBu
(2.45V)
+30dBu
(24.5V)
In these specifications, 0dBu = 0.775Vrms.
+48V DC (phantom power) can be supplied t
o INPUT XLR type connectors via eac
h individual software controlled switch.
Output
Terminals
Actual Source
Impedance
For Use With
Nominal
Output Level
Connector
balanced /
Unbalanced
Nominal Max. before clip
OUTPUT 1-8 75Ω 600Ω Lines +4dBu
(1.23 V)
+24dBu
(12.3 V)
XLR-3-32 type
*1
*1. 1: GND, 2: HOT, 3: COLD
Balanced
In these specifications, 0dBu = 0.775Vrms.
Terminal Format Data length Level Audio Connector
Primary / Secondary Dante 24 or 32bit 1000BASE-T 16ch (Tio1608-D to other devices)
8ch (Other devices to Tio1608-D)
etherCON Cat5e