Owner's Manual

CL Editor Owner’s Manual

3 Input patch

Click the CHANNEL field, and choose one of the following as the signal route that will be

patched to the input channel(s) of the currently selected GEQ module.

The channel name is shown in the boxes immediately below.

4 Input meter

This indicates the level of the signal that is being input to the currently selected GEQ mod-

ule.

5 Output patch

Click the CHANNEL field, and choose one of the following as the signal route that will be

patched to the output channel(s) of the currently selected GEQ module.

The channel name is shown in the boxes immediately below.

6 Output meter

This indicates the level of the signal that is being output from the currently selected GEQ

module.

NONE No assignment

INS1 MIX 1–24 MIX channel 1–24 insert out 1

INS1 MTRX1–8 MATRIX channel 1–8 insert out 1

INS1 ST L, INS1 ST R,

INS1 M(C)

Insert out 1 of STEREO channel L/R or the MONO channel

INS2 MIX 1–24 MIX channel 1–24 insert out 2

INS2 MTRX1–8 MATRIX channel 1–8 insert out 2

INS2 ST L, INS2 ST R,

INS2 M(C)

Insert out 2 of STEREO channel L/R or the MONO channel

NONE No assignment

INS1 MIX 1–24 MIX channel 1–24 insert in 1

INS1 MTRX1–8 MATRIX channel 1–8 insert in 1

INS1 ST L, INS1 ST R,

INS1 M(C)

Insert in 1 of STEREO channel L/R or the MONO channel

INS2 MIX 1–24 MIX channel 1–24 insert in 2

INS2 MTRX1–8 MATRIX channel 1–8 insert in 2

INS2 ST L, INS2 ST R,

INS2 M(C)

Insert in 2 of STEREO channel L/R or the MONO channel

3 4