Owner's Manual

CL Editor Owner’s Manual
56
2 Input patch
Select the input port (s) that will be assigned to the rack, from the following choices.
This is not shown if nothing is mounted in the rack.
GEQ rack is for only output channels. If you want to use GEQ modules to the input channels, you can
mount them in the EFFECT rack ( ➥ p.60.)
3 Module graphic
This area shows a graphic of the GEQ module that is currently assigned to the rack, and the parameters of that module.
You cannot edit the parameters in this screen.
Double-click this to open the module editor for that rack unit.
By holding down the <Ctrl>(< >) key of your computer keyboard and double-clicking this, you can open multiple
rack module editors. For these additional editors, the rack select buttons are not linked with the RACK popup window
of the CL itself.
4 Input meter/Output meter
These indicate the level of the signals being input and output from the rack.
5 Output patch
Select the output port(s) that will be assigned to the rack, from the following choices.
6 ON
This switches the GEQ module between active and bypassed states.
A GEQ module is active when the ON button is lit.
7 GEQ Link Indicator
If a GEQ LINK is active, the GEQ Link indicator will be displayed in the left side of the rack (➥ p.59.)
NONE No assignment
INS1 MIX 1–24 MIX channel 1–24 insert out 1
INS1 MTRX1–8 MATRIX channel 1–8 insert out 1
INS1 ST L, INS1 ST R, INS1 M(C) Insert out 1 of STEREO channel L/R or the MONO channel
INS2 MIX 1–24 MIX channel 1–24 insert out 2
INS2 MTRX1–8 MATRIX channel 1–8 insert out 2
INS2 ST L, INS2 ST R, INS2 M(C) Insert out 2 of STEREO channel L/R or the MONO channel
NONE No assignment
INS1 MIX 1–24 MIX channel 1–24 insert in 1
INS1 MTRX1–8 MATRIX channel 1–8 insert in 1
INS1 ST L, INS1 ST R, INS1 M(C) Insert in 1 of STEREO channel L/R or the MONO channel
INS2 MIX 1–24 MIX channel 1–24 insert in 2
INS2 MTRX1–8 MATRIX channel 1–8 insert in 2
INS2 ST L, INS2 ST R, INS2 M(C) Insert in 2 of STEREO channel L/R or the MONO channel
NOTE