User manual

FAQ/Troubleshooting
iXOS-JUKEMAN 2.2 User Manual Pre.12/97 259
license=ijklmnop
NFS server plus iXOS-JUKEMAN (NT)
In iXOS-JUKEMAN a NFS server is integrated. To use another NFS
server for exporting filesystems on harddisk and the jukeman filesystem,
some configuration has to be done, because both compete for several
ressources:
- port 2049 (default for NFS services)
- port 111 for the portmapper
- anouncement as NFS service
To tell iXOS-JUKEMAN not to start the own NFS service, the file
'server.cfg' has to contain the following parameters:
parameters {
portno=4027
waitpm=300
nonfsd=1
}
portno=4027 sets an alternative port for the internal communication of
iXOS-JUKEMAN. nonfsd=1 causes iXOS-JUKEMAN not to register itself
as NFS service.
waitpm=300 causes iXOS-JUKEMAN to try 5 minutes an inquiry for an-
other portmapper at port 111.
PC-NFS and mount of iXOS-JUKEMAN (UNIX) filesystem
PC-NFS Pro Version 1.0 and 2.0 does not have the possibility to mount a
filesystem over a different port than default (2049). If iXOS-JUKEMAN is
installed on a UNIX server, per default port 4027 is used to distinguish
NFS requests for the UNIX mount daemon and for iXOS-JUKEMAN.
Because it is not possible to set the port number with PC-NFS Pro, the
only way to mount the jukebox filesystem is to set the port 2049 for iXOS-
JUKEMAN NFS as parameter in file 'server.cfg'. But then the UNIX mount
daemon cannot be used furthermore.
PC-NFS 5.1 for Windows 3.1 and WfW 3.11 has a port number option
and therefore it can be used to mount the jukeman filesystem over port
4027, for instance.
command: