User manual

Command line index
iXOS-JUKEMAN 2.2 User Manual Pre.12/97 213
6 Command line index
6.1 Introduction
The following pages contain brief descriptions of the commands that can
be passed to the program cdadm.
Note: For reasons of clarity the optional paramter “-h <hostname>” is
left out on the following pages. Using this parameter, the iXOS-
JUKEMAN server can be administered from any host where the
administration client cdadm is installed. See section “Network
administration” on page 96.
If you want to... use this command: page
attach a device to the server
cdadm attach
215
detach a device from the server
cdadm detach
218
query server parameters
cdadm getpar
219
set server parameters
cdadm setpar
228
insert disks into a device
cdadm insert
220
move disks to a drive
cdadm movecd
223
print out surveys
cdadm survey
229
remove disks from a device
cdadm remove
226
rename disks
cdadm rename
175
test, if the server is running
cdadm null
224
test certain slots for disks
cdadm testcd
233