User manual

Burning disks/writing incrementally
iXOS-JUKEMAN 2.2 User Manual Pre.12/97 151
ried out. Both burn data to the disc and burn data and verify it can be
used to start the recording process, in the latter case also with a verifica-
tion flag.
Jukebox
Choose the jukebox, recorder drive and required slots. From iXOS-
JUKEMAN 2.2 and later versions, it is possible to select more than one
slot, so that several CD can be burned using the same source.
The individual slots can be selected by using the [CTRL] key or, if the
slots are consecutive, using [SHIFT].
When you have selected the Source and the Target, it is then possible to
start the recording process with [WRITE]. [CANCEL] allows you to leave
the dialogue without recording.
4.12.2 Burning disks incrementally
From version 2.0 it is possible to record disks incrementally and transpar-
ently. This means that it is possible to regard the CD as if it were a noral
hard disk, once the appropriate initialisation has been carried out. The
only difference is that the contents of the system buffer must at some
point be explicitly burned onto the CD. It is important to note that the disk