User manual

Manage disks
iXOS-JUKEMAN 2.2 User Manual Pre.12/97 115
will be scanned periodically for new disks (see server parame-
ter dcheck in section “Server parameters” on page 123).
Move disks to or from a drive
If a disk is accessed by a client request it will be moved to a drive auto-
matically. If you want to move a disk into a specific drive (e. g., a recorder)
click [MOVE CD] and select the slot number and the drive:
To move a disk from a drive back to its slot select “from Drive back to
Slot” and select the drive.
Test disks
If you are uncertain about the contents of a slot (e. g., if you changed
disks manually without using the GUI) you can explicitly test the contents
of one or more slots. To to this, select the corresponding slots and click
[TEST].
Rescan jukebox
Click [RESCAN] to refresh the internal memory of the jukebox. This is re-
quired for some jukeboxes with a non-volatile memory if you changed
disks manually, and can do no harm when performed on other jukeboxes.
Please note that a complete rescan can take some time for bigger juke-
boxes (such as Pioneer DRM-5004x, JVC MC-200/600, DISC CD-CHG
DJ-200/600). For these jukeboxes, a partial rescan can be performed if
the relevant disks are tested.