User manual

Manage disks
iXOS-JUKEMAN 2.2 User Manual Pre.12/97 113
This dialog lists all slots of the currently selected device. The list displays
the slot number followed by the disk name in the selected name format.
By default, the original name of the disk is displayed (Original). The name
format can be selected with one of the radion buttons PC, RR, HS, and
Original.
Rename disks
Note: iXOS-JUKEMAN 2.2 allows disks to be renamed using the op-
erating system functions (e. g., Windows NT Explorer or UNIX
mv command). The renaming takes place for the name format
defined for the view.
The disk name can only be changed if one of the three name formats PC,
RR or HS is selected. The original name stored on the disk cannot be
changed for obvious reasons. The Rename dialog allows to change the
name for any of the three name formats.
1. Click on the disk to be renamed.
2. Click [RENAME]. This button can only be clicked if a single disk is se-
lected. The selected name format must not be “Original”. The following
dialog will pop up: