Technical information

C
30 08.06
CHAPTER
PAGE ISSUE
TWO-STROKE ENGINE AM6
ENGLISH
SECTION 2
C - ENGINE
Minarelli Engine
F.53F.52
F.54bF.54
2
1
2
F.55
14) PROCEED in reverse order. Refit the clutch assembly and remember to replace the nut fixing washer with a
new one; fit the clutch boss fixing nut (Cs 5.5 ÷ 6.0 kg*m) and bend the tab.
15) FIT the following components on the output shaft, in the order given: clutch rod (grease beforehand), ball and
disc pusher.
16) FIT the clutch disc assembly in the order shown in (F.54); the iron discs (1-2-3 F.54) should be fitted with the
notch, highlighted by the arrows, at 120° the one from the other, starting from the notch facing upwards on the
first disc. Fit the last clutch disc, making sure it is timed with the boss (F54b).