DIGITAL RECORDING PROCESSOR CBX-D5 Owner's Manual 1 SYSTEM SETUP GUIDE
Chapter Introduction 1 : Introduction 1 1 1 Introduction This guide explains how to setup a number of CBX-D5 based recording systems. Table of contents Introduction – page 1 Cubase Audio & Atari ST/STE System – page 2 Cubase Audio & Atari TT System – page 4 Digital Performer & Apple Macintosh System – page 6 Future updates From time to time this guide will be updated using single sheet supplements. Please see your Yamaha dealer for the latest supplement.
2 2 Chapter Chapter 2 : Cubase 2 : Cubase Audio Audio & Atari & Atari ST/STE ST/STE System System 2 Cubase Audio & Atari ST/STE System An overview In this system the CBX-D5 is used with an Atari ST/STE computer and the supporting software is Cubase Audio by Steinberg. What you will need 1) The CBX-D5, a power cable, two MIDI cables, a 50-way SCSI cable, and a SCSI terminator (all these except for one MIDI cable are provided with the CBX-D5). 2) An Atari ST computer and an Atari video monitor.
Switching Switching on the on the power power 3 3 Figure 1. System connections POWER SUPPLY 50-WAY to 25-PIN SCSI CABLE SCSI HARD DISK SCSI 50-WAY SCSI CABLE POWER CABLE DMA to SCSI Converter @ DMA IN 19-PIN to 19-PIN D-SUB CABLE POWER CABLE ATARI ST/STE SCSI TERMINATOR SCSI HARD DISK CBX-D5 MIDI OUT MIDI OUT MIDI IN POWER CABLE MIDI IN MIDI CABLES Switching on the power 1) Switch on the SCSI devices: CBX-D5, hard disk, SCSI adaptor. 2) Switch on the Atari computer and load Cubase Audio.
