SPECIAL MESSAGE SECTION This product utilizes batteries or an external power supply (adapter). DO NOT connect this product to any power supply or adapter other than one described in the manual, on the name plate, or specifically recommended by Yamaha. WARNING: Do not place this product in a position where anyone could walk on, trip over, or roll anything over power or connecting cords of any kind.
FCC INFORMATION (U.S.A.) 1. IMPORTANT NOTICE: DO NOT MODIFY THIS UNIT! This product, when installed as indicated in the instructions contained in this manual, meets FCC requirements. Modifications not expressly approved by Yamaha may void your authority, granted by the FCC, to use the product. 2. IMPORTANT: When connecting this product to accessories and/or another product use only high quality shielded cables. Cable/s supplied with this product MUST be used. Follow all installation instructions.
CBX-D3 Owner’s Manual English English Mode d’emploi Français Français Bedienungsanleitung Deutsch Deutsch
1 Safety, Warnings & Notes Please read the following information before operating your CBX-D3. Safety information • Make sure that the power adaptor cord is located so that it will not be walked on or snagged by nearby equipment. • Do not expose the CBX-D3 to extremes of humidity. • Do not place the CBX-D3 near water. • Do not place the CBX-D3 in areas subject to extremely low temperatures. • Do not place the CBX-D3 in locations subject to excessive dust.
1 Chapter : Table of Contents 1 Introduction ............................................. 1 Welcome to the CBX-D3 .............................. 1 CBX-D3 features........................................... 1 Important Notice ........................................... 1 Unpacking .................................................... 2 Installation..................................................... 2 Trademarks.................................................... 2 Powering up a CBX-D3 System ............
Introduction1 Introduction 1 1 Introduction Welcome to the CBX-D3 Thank you for purchasing a CBX-D3 Digital Recording Processor. Connecting the CBX-D3 to a controlling computer with supporting software and a SCSI hard disk will provide up to four channels of CD quality audio recording, processing, and playback.
2 2 Chapter Chapter 1 : Introduction 1 : Introduction Unpacking The CBX-D3 package should contain the following items. 1 CBX-D3 1 PA-5B AC Adaptor (or recommended equivalent) Serial No: 2 1U rack mounting brackets (attached to the CBX-D3) 1 Owner’s Manual 1 User Registration Card Retain the packing materials for future use. Installation The CBX-D3 comes equipped with mounting brackets at both sides, allowing easy installation on any standard 19" electronic equipment rack.
CBX-D3 CBX-D3 Terminology3 Terminology 3 2 CBX-D3 Terminology SCSI SCSI (pronounced “scuzzy”) stands for Small Computer System Interface. The SCSI is a standard format for connecting a computer to peripheral devices such as hard disks, printers, and scanners. Devices are connected in a daisy chain, with each device (including the computer) identified by a SCSI ID between 0 and 7. Your CBX-D3, your computer, and your hard disk are connected together in a SCSI daisy chain.
4 4 Chapter Chapter 3 : What 3 : What is the is the CBX-D3? CBX-D3? 3 What is the CBX-D3? The CBX-D3 is a digital recording processor. When connected to a controlling computer with supporting software and a SCSI hard disk, the CBX-D3 provides up to four channels of CD-quality audio recording, processing, and playback. Computer based The CBX-D3 is controlled by a computer that is running CBX-D3 supporting software.
The CBX-D3 The CBX-D3 in a MIDI in a MIDI recording recording system5 system The CBX-D3 in a MIDI recording system The following diagram shows how the CBX-D3 can be integrated into a MIDI-sequencer-based music production system.
6 6 Chapter Chapter 4 : Controls 4 : Controls & Connections & Connections 4 Controls & Connections Front panel 1 2 3 5 4 DIGITAL RECORDING PROCESSOR CBX-D3 6 SAMPLING FREQ 7 8 9 1 INPUT LEVEL 2 OUTPUT MONITOR 0 INPUT LEVEL POWER SON/TOFF SCSI MIDI 48 44.1 32 22.05 CLIP 1 2 3 4 -6 PHONES VOLUME -24 1 1 1 MIC 2 2 POWER switch Switches the power on or off. 2 PHONES connection A 1/4-inch (6.35mm) stereo headphone jack.
FrontFront panel7 panel 6 7 SAMPLING FREQ indicators Indicate the sampling frequency selected for recording or playback: 48kHz, 44.1kHz, 32kHz, or 22.05kHz. The frequency selection is made by software. The 48kHz LED also acts as a download indicator, flashing to indicate that the CBX-D3 has not yet completed power-on downloading of system data. 7 INPUT LEVEL indicators Two 3-segment LED bargraphs indicating the audio input levels.
8 8 Chapter Chapter 4 : Controls 4 : Controls & Connections & Connections Rear panel 2 3 4 9 IN OUT IN 2 IN 1 OUT 4 OUT 3 OUT 2 OUT SCSI ID OUT 1 5 DC IN ANALOG IN/OUT MIDI 1 NOTE: 5 DIGITAL 6 7 SCSI 8 For your convenience, the top panel includes illustrations and names of all terminals located on the rear panel. This may help you locate cables and connectors without having to look behind the device. 1 DC IN connector Power connector.
